Joined in 2023 
82 
63 About this deal
When it comes to purchasing a power bank, there are a few important factors to consider. Let's dive into them: Let's start with some options for those on a tight budget. Don't need more than a single charge? These are the options for you: EAFU 10,000mAh Power Bank The results? The Nintendo Switch Edition charged the Switch 289%. The Speed 20000 PD charged it 295%. Again, when you consider a margin of error there isn’t much difference. The ±6% equals ~10 minutes of playtime. That depends on what your expectations are. The standard Switch has a 4,310mAh battery, so if you want a full charge out of a portable charger at the very least, you're going to have to look for one with a capacity around that.
Anker PowerCore 20100 - 20000mAh Ultra High Capacity Power
Home > Computers & Software > Portable Chargers > Anker Portable Chargers > Anker PowerCore 20100 Portable Charger Manual Anker PowerCore 20100 Portable Charger A portable power bank charger is a simple way to top up your gadgets on the go. Find out what key features to look for, along with some of the best cheap power banks we’ve tested. NiaBladerunner Or people who travel frequently, long flights, long drives, etc... I can't count the number of times a power bank has saved my hide, especially when traveling in a foreign country, using my phone as a GPS, only to realize my battery was about to die. Or saved me from boredom on a 9 hour flight. Or was just more convenient when laying in a hotel room than carrying a bag full of wall adapters/cords and being tethered to a wall.
Gizchina News of the week
For those not in the know, you may want to mention that the best portable chargers will have Power Delivery. This is especially useful if you want to use the Switch and charge it at the same time. The iPhone X has a 2716mAh battery, which is relatively small for a smartphone in 2018. That probably means you won't get seven charges for your phone, but it'll still be quite a lot depending on how big the battery inside your device is. Finally, I tested the full capacity of both portable chargers. I drained my Nintendo Switch to 0% and charged the portable charger to 100%. I then recharged the Switch using the portable charger up to 100%. When done I drained the Switch again and recharged it again with the portable charger. This continued until the portable charger shut down. MooPenguin32 Many thanks for posting a link to the documentation. This is exactly what I was referring to in my initial response, and it's what prevented my GPD WIN 2 from charging at all on my old charger.
Which Anker power banks are allowed on a flight?
As @SZak2015 mentioned there are many ipad chargers and since you have the powerport+ I would suggest that it could take well over 20 hours to charge if you are only inputting 1amp. I would recommend any of the following from Anker:I had an Anker 12,000mah and it worked fine for me for several years. I upgraded because it wouldn't charge my GPD WIN 2. I upgraded to a RAVPower 26800mAh PD bank. Some devices require higher voltages, which is what USB PD provides. If you have multiple devices, know that you need higher voltages (Like the GPD WIN 2) or just want to future proof, make sure your battery supports USB PD/whatever voltage your device needs. What You Get: Anker PowerCore 20100 Portable Charger, Micro USB cable, travel pouch, welcome guide, our fan-favorite 18-month warranty and friendly customer service. USB-C cable and Lightning cable for iPhone / iPad sold separately.
Anker PowerCore 20100 Power Bank Review - PortableWise Anker PowerCore 20100 Power Bank Review - PortableWise
I still can’t get the last light to stop blinking. I’m using this wall charger for reference: iPad Wall Charger Please kindly be noted that the PowerCore + 20100 USB-C usually takes 8-9 hours for a full recharge via a 5V/2.4A power supply. There should be no problem to recharge it via an iPad wall charger(which offers 5V/2A output) with the A-C cable comes with our battery. On the other hand, the wireless charger is rated for up to 10W. That should give you a decent charging speed too. And as it is Qi-certified, you can easily use the wireless charging pad with most of your accessories and phones. The Anker Powercore 20100 possesses an enormous battery capacity of 20,000mAh. In most 20,000mAh powerbanks we’ve come across, after calculating heat loss and such, this normally comes down to about 15,000mAh. Anker’s devices however always seem to provide the actual number as promised, at least closer to it. The PowerCore 20100 gives more charges than the iMuto 20,000mAh and is able to charge an iPhone 5S seven times compared to iMuto’s barely six. It almost manages to charge a Samsung Galaxy Note 7 four times and can even charge an iPad Mini twice. The powerbank also holds charge way better than most powerbanks and doesn’t lose battery over time.The Anker PowerCore 20100 power bank is capable of simultaneously connecting to a maximum of two devices. With a battery capacity of 20100 mAh, this power bank provides sufficient power for prolonged usage. The power bank is charged via a USB charging source. With a width of 166 millimeters, a depth of 58 millimeters, and a height of 22 millimeters, it is relatively compact and easily portable. Weighing in at 356 grams, it is also lightweight, enhancing its portability. The important thing to bear in mind is that, on average, your Switch will charge slower using anything other than a USB-C. This likely won't be an issue if you only plan on charging the Switch while it isn't in use, but if you want to keep your battery topped up while playing, you'll want a USB-C option. That way it will charge as fast as you're using it, keeping your Switch at 100%. Brand Reliability: When it comes to portable power banks, it's essential to choose a trustworthy brand. Brands like Anker have a solid reputation for producing safe and high-quality products, ensuring your devices are charged efficiently and without any risks.
Powercore 20100+ is fully charged? How to tell if Anker Powercore 20100+ is fully charged?
dzynwa7, Thanks for your question and effort to test. @cava3395 ,thanks for your right answer about the indicator. If the PowerCore + 20100 USB-C is fully recharged, all the indicators would turn solid and will turn off automatically later. Yes, with most portable chargers the small light blinks while charging. Often the light will remain lit constantly when the charging cycle is complete. After seeing the awesome digital battery reading on the iMuto 20000mAh yesterday, I’m a little bummed out that this unit treats us with LED battery indicators again. When powerbanks reach huge capacities as this, it’s incredibly useful to see exactly how much charge is left in the device. Four LED battery indicators just aren’t accurate enough and are precisely that, “indicators”.
The Anker PowerCore III 10K makes portable charging hassle-free. It comes with two USB ports and a wireless charging pad to charge all your devices. Both USB ports can offer a speedy charge. They are each rated for 18W. So, what does it have to offer? To start with it, it has three USB ports in total. And you can use three of them for charging up your devices. In other words, the USB-C port that’s on the INIU B41 is an In & Out port. mAh stands for milliampère/hour and indicates the power of a battery. A battery of for example 2000mAh will supply 2000 milliampère per hour and is able to run a radio that uses 250mA per hour for 8 hours. A battery with a higher mAh will have a longer runtime. Simultaneous charging is supported, letting you use all three ports to charge devices at the same time. But there's no pass-through charging, which would allow the PowerCore+ to charge other devices while it is plugged in. There's also no fast charging, so compatible devices will take longer to charge than they will with a battery like the X6 Pro. Performance and Conclusions If you want to go with USB C then I would suggest this one which will allow it to fully recharge in approx 10 hours
Great Deal 
New Comment