BENFEI Active DVI-D to VGA Adapter, DVI-D 24+1 to VGA Male to Female Adapter

Product Information

An earlier attempt to promulgate an updated standard to the analog VGA connector was made by the Video Electronics Standards Association (VESA) in 1994 and 1995, with the Enhanced Video Connector (EVC), which was intended to consolidate cables between the computer and monitor. [3] [4] EVC used a 35-pin Molex MicroCross connector and carried analog video (input and output), analog stereo audio (input and output), and data (via USB and FireWire). At the same time, with the increasing availability of digital flat-panel displays, the priority shifted to digital video transmission, which would remove the extra analog/digital conversion steps required for VGA and EVC; [5] :5–6 the EVC connector was reused by VESA, [6] which released the P&D standard in 1997. [3] P&D offered single-link TMDS digital video with, as an option, analog video output and data (USB and FireWire), using a 35-pin MicroCross connector similar to EVC; the analog audio and video input lines from EVC were repurposed to carry digital video for P&D. [5] :4 [7] :§1.3.3 However, DVI-I and DVI-D are still found on monitors and computers. I won’t be talking about DVI-A in this article because it’s rarely used today. MicroCross DVI (Digital Visual Interface) Connector System" (PDF). Molex. November 1999 . Retrieved 31 January 2023. DVI-D single link has the same bandwidth as DVI-I single link, so the maximum resolution is the same at 1920×1200 at 60 Hz. In some cases, DVI can carry over audio when connected to a physical HDMI adapter. For more information about that, take a look at this article. If you have the option to use HDMI or another port liked Display Port, use those instead, DVI and VGA should only be used as a last resort because the quality isn’t the best.

One of the purposes of DVI stream encoding is to provide a DC-balanced output that reduces decoding errors. This goal is achieved by using 10-bit symbols for 8-bit or less characters and using the extra bits for the DC balancing. Unified Display Interface (UDI) was proposed by Intel to replace both DVI and HDMI, but was deprecated in favor of DisplayPort. DVI-I (integrated, combines digital and analog in the same connector; digital may be single or dual link) Walton, Jarred (March 2, 2007). "Dell 2407WFP and 3007WFP LCD Comparison". AnandTech . Retrieved November 7, 2013.The Best DVI Cable for 144hz | The Technology Land". thetechnologyland.com. 2019-08-21 . Retrieved 2022-07-14. High-Definition Multimedia Interface (HDMI), a forward-compatible standard that also includes digital audio transmission

a b "Digital Visual Interface Revision 1.0" (PDF). Digital Display Working Group. 2 April 1999 . Retrieved 31 January 2023. Manchester, Gary (October 7, 1996). "Molex PnD intellectual property letter" (PDF). Archived from the original (PDF) on February 22, 2003. The maximum resolution on a DVI-D dual link is 2560×1440 at 60 Hz, the same as the DVI-I dual link resolution.Female M1-DA connector pins (view of plug) DVI port on a Sony HD CRT TV that complies with EIA-861 DVI output connector on a computer To convert DVI to HDMI you’ll need a passive physical adapter. The good news is both DVI-I and DVI-D can be converted to HDMI because they both use digital signals.

MicroCross DVI Connector System: Digital Visual Interface Standard" (PDF). Molex. December 2000 . Retrieved 31 January 2023.DVI is the only widespread video standard that includes analog and digital transmission in the same connector. [13] Competing standards are exclusively digital: these include a system using low-voltage differential signaling ( LVDS), known by its proprietary names FPD-Link (flat-panel display) and FLATLINK; and its successors, the LVDS Display Interface (LDI) and OpenLDI. So you can use it to connect to a secondary old monitor or TV that only has DVI or VGA inputs. The output resolution will be good enough for documents and watching movies but it won’t be true-HD and I definitely do not recommend it for games. VGA (Video Graphics Array) is a hardware specification for display monitors and computers that allows a computer to display applications on a VGA-based monitor via a VGA cable. VGA technology is one of the oldest forms of display hardware in computing and is outfitted in virtually every computer system in the world. VGA uses analog signals but is compatible with most digital devices. While DVI technology has superseded VGA technology, both specifications are often included in personal computers, with VGA technology being much more common in laptop computers than desktop computers. Digital Visual Interface ( DVI) is a video display interface developed by the Digital Display Working Group (DDWG). The digital interface is used to connect a video source, such as a video display controller, to a display device, such as a computer monitor. It was developed with the intention of creating an industry standard for the transfer of uncompressed digital video content. The DVI connector on a device is given one of three names, depending on which signals it implements:

Because P&D was a physically large, expensive connector, a consortium of companies developed the DFP standard (1999), which was focused solely on digital video transmission using a 20-pin micro ribbon connector and omitted the analog video and data capabilities of P&D. [4] :3 [5] :4 DVI instead chose to strip just the data functions from P&D, using a 29-pin MicroCross connector to carry digital and analog video. [8] Critically, DVI allows dual-link TMDS signals, [9] meaning it supports higher resolutions than the single-link P&D and DFP connectors, which led to its successful adoption as an industry standard. Compatibility of DVI with P&D and DFP is accomplished typically through passive adapters that provide appropriate physical interfaces, as all three standards use the same DDC/EDID handshaking protocols and TMDS digital video signals. [10] :§1.3.7 Digital video pixel data is transported using multiple TMDS twisted pairs. At the electrical level, these pairs are highly resistant to electrical noise and other forms of analog distortion.To promote interoperability between DVI-D and HDMI devices, HDMI source components and displays support DVI-D signalling. For example, an HDMI display can be driven by a DVI-D source because HDMI and DVI-D both define an overlapping minimum set of supported resolutions and frame buffer formats. As I mentioned earlier, DVI and VGA are dying standards, but they still have some practical uses. DVI-I is good because it can support modern resolutions (1080P at 60Hz) and you can easily convert it to other connector types. Most analog connectors, such as VGA, require active adapters to convert to HDMI, but you don’t need that with DVI. Specifications [ edit ] A passive DVI-to-VGA adapter. This adapter will not work with a DVI-D output. It requires a DVI-I or DVI-A output to get the analog signal to a VGA input (even if the adapter looks like a DVI-D). A more expensive active adapter (or converter) is required to connect DVI-D to VGA. Digital [ edit ] DVI (Digital Visual Interface) is a hardware specification for computers and display equipment that is similar to VGA. DVI-D (Digital Visual Interface Digital) refers to DVI technology that is used exclusively with digital devices, while other versions of DVI can be used with analog devices. While VGA technology was made for analog computers, DVI technology is more modern and is intended for digital computers and display equipment, such as monitors and projectors. While VGA and DVI produce similar quality on regular monitors, DVI produces much higher picture quality on LCD monitors and other high-definition equipment. In December 2010, Intel, AMD, and several computer and display manufacturers announced they would stop supporting DVI-I, VGA and LVDS-technologies from 2013/2015, and instead speed up adoption of DisplayPort and HDMI. [18] [19] They also stated: "Legacy interfaces such as VGA, DVI and LVDS have not kept pace, and newer standards such as DisplayPort and HDMI clearly provide the best connectivity options moving forward. In our opinion, DisplayPort 1.2 is the future interface for PC monitors, along with HDMI 1.4a for TV connectivity".