Fujifilm NP-W126S Lithium-Ion Battery for X-Pro1, X-E1, X-M1, X-A1

Product Information

For using the maximum power of your X-T2 or X-Pro2 mirrorless camera, the Fujifilm NP-W126S Li-Ion Battery Pack has been designed to better manage heat and ensure lightning fast camera performance. I really like the overall compact design, being both smaller and lighter than original Fuji charger, yet being able to charge two batteries at once and that from an USB power source.

Sạc kép tương thích với pin Fujifilm NP-W126S, trong khi đó, pin thay thế đáp ứng mọi thông số kỹ thuật với pin NP-W126S để tương thích các dòng máy ảnh Fujifilm FinePix, X-A5, X-H1, X-A10, X100F, X-T10, X-T20, X-Pro1, X-Pro2, 30EXR, HS33EXR, HS35EXR, HS50EXR, X-A1, X-A2, X-A3, X-E1, X-E2, X-E2S, X-M1, X-T1, X-T2,. A strong share network tin ensure the "DOUBLE INSURANCE" of the priority of international warehouses and the supplement of domestic’s. The frame rate and number of frames per burst varies with shooting conditions and type of memory card used. All of them offer >90% capacity of the original batteries and also they don’t seem to produce significantly more heat even after some heavy use.So, when it drops to 2 bars, you possibly won’t even finish a single longer exposure in freezing temperatures. We have already reported about Dom Varney’s articles “ Powering the Fujifilm X-T3” and “ Fujifilm NP-W126S Battery Counterfeits – A Visual Guide to Spotting the Fakes“. It’s definitely a good thing that people having multiple bodies don’t need multiple battery types and multiple chargers. Each of the Fujifilm X-System cameras requires a NP-W126 or the newer NP-W126S battery for their operation. Genuine Fuji mains battery charger suitable for charging the NP-W126 and NP-W126S lithium ion batteries, as used by the Fuji X-T2, X-Pro2, X-T10, X-E2S, X-A2, HS50EXR, HS33EXR and HS30EXR digital camera models.

All content, design, and layout are Copyright © 1998–2023 Digital Photography Review All Rights Reserved. The company has many years of experience when it comes to charging these kinds of batteries thanks to their highly regarded flashlights. With the X-T2 announcement and the new battery, I'm trying to get it around my head what the difference in the battery is? The packaging is made of durable material and is flame retardant, avoiding damage when falling from a low place.The only downside is the USB cable: It is extremely short, not very flexible and fixed to the charger, you can't swap it out. It might be the because of larger processor, no matter what it is doing, or even the larger sensor generating extra heat. As used by the Fuji X-T2, X-Pro2, X-T10, X-E2S, X-A2, HS50EXR, HS33EXR and HS30EXR digital camera models.

While the indicator isn’t too useful for the original batteries, it’s next to useless for other batteries, where the in-camera indicator shows full battery for roughly 90% of the battery capacity! We've selected a group of cameras that are easy to keep with you, and that can adapt to take photos wherever and whenever something memorable happens. However, since the Fuji batteries have quite a different voltage curve, compared to all the aftermarket batteries, the remaining capacity shown by the camera isn’t accurate for non-Fuji batteries.I haven’t done any rigorous testing in this area, so far I’ve just tried to put all the brands to a fridge for few days, but haven’t measured any significant loss of charge. However, according to my temperature measurements, there are several brands that are at least comparable to the original. Some batteries behave very similarly and often probably are just different brands for the very same product from some Chinese factory. The charger is extremely compact, is able to hold two batteries, comes with a status display as well as a third contact pin which reads out the temperatures and health status of the battery. Reproduction in whole or part in any form or medium without specific written permission is prohibited.

Lots of people use 3rd party batteries and chargers with good results, but I'd never allow one to charge while I was sleeping or away. This battery is made of top materials of Lithiumion cells that have been safely certified by RoHS, CE, FCC and tested through repeated simulated work and commissioning before they are shipped from the factory. I actually thought the FX1 would feature automatic protection when overheating due to the thermal monitoring pin of the charger. All of our Fujifilm NP-W126S high-quality alternatives have been tested to achieve and/or exceed original performance and are 100% compatible with the original manufacturer's specifications. The Fujifilm NP-W126S is recommended for X-T2 in conjunction with the Vertical Power Booster Grip to allow 30min of 4K movie recording.

These capable cameras should be solid and well-built, have both the speed and focus to capture fast action and offer professional-level image quality. When I recently got myself an X100V I was also looking for a fitting charger and in the end went with the Nitecore FX1. Power products are tested to the highest standards and manufactured using high quality components to deliver outstanding performance. There are a lot of photo/video cameras that have found a role as B-cameras on professional film productions or even A-cameras for amateur and independent productions.