ARCTIC MX-6 (4 g) - Ultimate Performance Thermal Paste for CPU, consoles, graphics cards, laptops, very high thermal conductivity, long durability, non-conductive, non-capacitive

Product Information

Small differences in temperatures jostle the chart a bit, but overall the more budget-friendly compounds show much more promising performance value due to relatively close load ranges. We see a trend that most good and great thermal compounds perform very similarly, but might be worlds apart in price per gram. In the following graph you can see the result, expressed in Delta temperature, that is, measured temperature minus ambient temperature, so that even if the ambient temperature varies, the comparison is still reliable. The above picture shows a thermal paste. This paste is not easy to spread in my opinion unlike MX-5 or even Noctua NT-H1. As shown in the slides above, the outcome of the different testing scenarios resulted in some interesting comparisons among the compounds. We’ll look at the overall thermal load averages for each, as well as the relative performance value of each in terms of price-per-gram. Why should you buy this: It is one of the best-performing pastes with excellent thermal conductivity.

Corsair Commander Pro, 100%/50% PWM Speed profiles (liquid cooling pump always @100%, if applicable) Even though a dizzying array of different thermal pastes is available — some blends have been around for over a decade — new formulations still come to market at a surprising pace. Long-time PC cooler maker NZXT recently entered the market with its first paste, the not-very-excitingly named NZXT High-Performance Thermal Paste. Cooler Master introduced a new purple CryoFuze, and Alphacool unveiled its Apex thermal paste. Cooling mainstay Corsair also has a new XTM70 blend that will be heading to our test bench soon, and Gelid has recently released its GC-4 Thermal Paste, showing that the TIM market is still thriving. The performance value chart shows most of the liquid metal compounds with a poor value-per-gram rating, but once again, Phobya LM proves to be the outlier for that sub-category with its budget price tag.

Thermal paste for processor (4 grams)

Now coming to the main point of this article, the following configuration is used for thermal paste testing: – The dispersion is quite good, denoting that it is not as viscous as it seemed to us in the first instance, especially when we have not applied as much pressure as a heatsink will apply to the processor and, in fact, we have put much more thermal paste on the paper of the which we will cast on the IHS of the processor normally.

Thanks to improved composition, the MX-6 has a measurably lower thermal resistance and achieves up to 20% better performance. It achieves this without reputed ingredients like expensive diamond dust or various precious metals.

Main features:

Thermal compounds might always be compared and debated over, but the simple fact remains: PC system building needs thermal compounds to effectively dissipate thermal loads. Without them, our beloved gaming and content-producing machines would struggle to keep components cool during heated frag sessions, heavy workstation computations, or just simply browsing the web. Please note that not every run of the stress test may yield the same result. This could well be due to many factors like mounting pressure, thermal paste application, and varying ambient temperature. Not to mention the silicon differences even among the same category of chips. Hence, it is pertinent to mention the testing methodology along with the specifics. Each time the even spread of the thermal paste was verified and where the thermal paste spread was not even or gives the impression of a tear or a poor application, the result was dropped and the new test with correct spread was repeated. This is done to ensure the validity of the data. Like all our thermal pastes, it is non-conductive and non-capacitive. This eliminates the risk of short circuits and discharges. For a compound that costs less than half as much as leading competitors , Phobya's Liquid Metal Compound LM offers impressive performance, often besting the the CoolLaboratory Liquid Pro or Thermal Grizzly Conductonaut in our tests. However, there is a catch to it. These wipes have very strong and unpleasant smell that doesn’t go away instantly. ARCTIC is not adding or mixing any artificial flavor for the fragrance to alter this smell. Each wipe is 115x115mm.

We're also putting a new take on an old approach to the test — thermal pads. These pads can be used as TIM and come as a single sheet you simply apply to your heatsink, with Thermaltake's Heilos Pad being the first new thermal pad entrant to see our test bed in the coming weeks. As you can see, the Arctic MX-6 is the winner of this comparison, taking 0.7 degrees from the excellent Noctua NT-H2 and 1.9 degrees Celsius from the CORSAIR TM30, which is not bad thermal paste either. Of course, in terms of performance, it seems that Arctic has done an excellent job again.

The XTM50 paste by itself has low viscosity, so can also just use the 'Dot method' to apply the paste and let the mounting pressure do its thing. But if you're too worried about applying using that method, then the bundled stencil and spreader make it very easy to get things done. In theory, you can use any application method for a compound with low viscosity, but the stencil makes it that much easier to apply. It's for new builders who don't necessarily have the technical know-how of properly applying thermal paste and how improper application can have a lasting impact on the overall performance of the CPU.

MX Cleaner is a 100% biodegradable wipe to clean the surface of CPU and other chips for easy and complete removal of the thermal paste and its residue. Each wipe is provided in a separate sealed container to ensure a longer shelf life. Arctic's MX-5 did not replace the MX-4 and the two pastes continued to co-exist up until recently, even though the new one often performed better than its predecessor. By contrast, the MX-6 actually replaces the MX-5. Here is a statement from ARCTIC about MX-6. “With its improved composition, the ARCTIC MX-6 has a measurably lower thermal resistance than the MX-4. The basis for calculation is the temperature difference between the cooler base and the heat source (in C) in relation to the applied heat load (in W), which also results in the unit C/W. The higher the thermal resistance, the worse the heat can be transferred through the TIM layer. Thermal insulators, as an example, therefore always have a particularly high thermal resistance, while thermal interface materials usually have a particularly low one.” Liquid metal compounds make their way to the top of the temperature chart with slightly cooler values than the traditional pastes. Interestingly, the difference between the top and bottom of this chart is less than 4C. The modus operandi has been the same: spread out a grain of rice with thermal paste, mount a heatsink, leave it on for 20 minutes at rest, Prime95 for 10 minutes, turn off the computer for 10 minutes and, with this, the paste is settled. Then we turn on the PC again and stress the processor with Prime95 for 10 minutes, capturing the maximum temperature that any of the cores has had.

What's An "Indie Game", Anyway?

We are proud of our thermal pastes. With over twenty years of experience in the PC cooling market and the goal to offer first-class products at a fair price, we have developed the MX-6. The formula of the new thermal paste is based on the proven MX-4, one of the best-selling thermal pastes in the world. Our focus was both on improving performance and on versatile application possibilities and an easy-to-use consistency. Thermal paste syringes have the same appearance as the vast majority of these products, of course with their identification label and with a cap that is pressured and not screwed. The wipe is made of 100% Limonene extracted from citrus essential oil. This would mean that these wipes don’t have alcohol or benzenes as this substance is used in industrial applications for cleaning as it is effective and gentle on metals and alloys. For the air cooling low- and high-tension tests, we used a large Noctua NH-D15 air cooler. We created the low tension mount environment by torquing the mounting screws to 1.13 Nm (10 in/lbs). Artic's Silver series is extremely popular among enthusiasts. The Silver series has also been around for quite some time now and the company has managed to keep it relevant in the space by adding newer, better variants to match the current standards. The Arctic Silver 5 is currently one of the most popular thermal paste solutions on the market. It's a high-density polysynthetic silver compound that's known to be very effective in a variety of builds. It contains micronized silver and several other thermally conductive ceramic particles to offer a high level of performance and stability.