APC - AP9640 - UPS Network Management Card 3, Black

Product Information

WARNING!- Connecting anon-APC serial cable to your devicecan causeunwanted, erraticdevice behavior. Device Identify problematic trends and take appropriate action before they escalate or export logs for analysis Terms Apply. Promotion ends 3 December 2023. Items are subject to availability. Max 5 units per customer. Description: View the existing RADIUS settings, enable or disable RADIUS authentication, and configure basic authentication parameters for up to two RADIUS servers.

My question is for anyone that has used or had exposure to both series - Is there really a drastic difference other than the network speeds between the two series. An since it’s just for monitoring is the drastic cost differential worth the investment between the 30's and 40's? Last does the AP9640/41 do things the older series cannot? Description: Configure the command line interface prompt to include or exclude the account type of the currently logged-in user. Any user can change this setting; all user accounts will be updated to use the new setting. Trading In Multiple UPSs: Customers can trade in multiple UPSs for larger UPSs. The VA of the multiple units can be combined, then doubled, to get a maximum VA the customer is eligible to trade up to. Customer cannot trade in UPSs for any single or multiple UPSs of lesser value (VA) than the combined VA of all units traded in. Supports reporting UPS information to Building Management Systems or other third party management systems via BACnet/IP (BTL certified) (Single Phase Smart-UPS only). To enable or disable these access methods, use the Web interface. On the Administration tab, select Network on the top menu bar, and then the access option under Console on the left navigation menu.

For protected servers, the included PowerchuteTM Network Shutdown software provides graceful, unattended shutdown in the event of a power outage (certified Vmware Ready, Nutanix Ready, Nutanix-AHV Ready). Example 2: To define the date as October 30, 2009, using the format configured in the preceding example, type:

InfraStruxure Central — Provide enterprise-level power management and management of agents, UPS devices, and environmental monitors. At the command line interface, use commands to configure the NMC. To use a command, type the command and press E NTER. Commands and arguments are valid in lowercase, uppercase, or mixed case. Options are case-sensitive. NOTE: In NMC2 firmware version 6.8.0 and higher, and in NMC3, you cannot search for assigned devices already on the network using an IP range unless you enable SNMPv1 and set the Community Name to “public”. Description: Exit from the command line interface session (this works the same as the exit command). radius Details about the extent of our regulation by the Financial Conduct Authority are available from us on request.You can access the command line interface through Telnet or SSH. Telnet is enabled by default. Enabling SSH disables Telnet.

Devices with an embedded Web/SNMP Card include (but are not limited to): Environmental Monitoring Unit 1 (AP9312TH)

Only one user at a time can log on to the Network Management Card. The priority for access, beginning with the highest priority, is as follows: