Phoenix Wing Mirrors Downlight Spotlight LED Replacement Real Glass Disc Round (44mm Diameter Replacement Glass Disc 2mm Thickness)

Product Information

Express - This is a Premium service that ensures the courier will make the delivery before 10:30am.

As advised in the instructions for your Optimyst product, the transducer should be cleaned every two weeks and only filtered water should be used to fill the water tank/sump. If tap water is used, a build-up of limescale can impact the operation of the transducer and seriously hinder the smoke and flame effect. Ionised and distilled water should also not be used. A. We Toughen all of our glass as standard. The only exception to this is when the size of the glass falls Glass "effect' green edged acrylic sheet imitates real glass with a very slight green tint to its appearance. This is most visible on the edges and can be used to great effect to fabricate products where the look of real glass is required. Hard wearing Place the new transducer into the sump, ensuring that the transducer is correctly placed – the tab on the transducer should be lined up with the moulded recess in the sump and the unit should be sitting flat. To prevent the cable becoming pinched between the nozzle and the sump, and to prevent water traveling down the wire and causing water to escape from the sump tank, place the cable in the provided slot in the right hand side wall of the sump.

the glass in place while keeping the top surface of the glass clear of obstruction. Should this be a Water should not be allowed to stand in the tank or sump for more than two weeks. If you will not be using the fire for an extended period, it is recommended to remove the water and dry the sump and water tank. Where can I get a replacement if needed? A. We machine a profiled and polished finish on every edge as standard, so there will be no trace of Its high gloss finish is not only very attractive but also more practically it's very easy to clean. Weather resistant Legally all Toughened glass must display a Toughening Mark to provide details of its origin and standard -

broken, they break into small safe to handle pieces as opposed to large sharp shards of broken glass.

My basket

To clean the transducer, remove it from the fire and dry carefully. Once dry, clean with the brush provided with your fire. A. Using UV Adhesive, we can attach Metal fixings directly to the glass, this can then allow screws to fix