Carlube DOT 3 Brake Fluid 500 ml

Product Information

Always disconnect the negative battery cable before servicing an electrical application on the vehicle to protect its electrical circuits in the event that a wire is accidentally pierced or grounded. We aim to exceed expectations in all that we do, which is why we carry out more thorough tests and examinations of our brake fluids than anybody else. However, its lower boiling point can lead to becoming ineffective and not compatible with high-performance vehicles and those with ABS systems. But you can still get the advantages of ATE brakes even if your car didn't have them from the factory. brake fluids have the property to absorb humidity in the air, which reduce their boiling points and consequently security.

As is clear from the wide coverage that DOT 4 brake fluid provides, it is an excellent choice for anyone who needs to cater for a wide selection of vehicles. Inspect the brake fluid by checking the reservoir cap, which usually indicates the minimum and maximum levels. Maccess is a trading style of Tetrosyl Express Ltd, Part of the Tetrosyl Group, a manufacturer and distributor of some of the UK's best known workplace essentials including the Nilco brand.At GetGeared Leatherhead we offer appointments - while not required, of you want to make sure certain items are there in your size, it's worth doing.

DOT 3 brake fluid will absorb less water than DOT 4 from the air over time, meaning you’ll need to have your fluid changed less frequently. By doing this, you will prevent water contamination and debris from shortening the life of the whole braking system. Getting the right gear is the best investment long-term, but we recognise that this may mean stretching your budget.Yes, DOT 3 brake fluid is still the most common type used in cars and trucks today; however, DOT 4 is gaining popularity due to its lower viscosity. The primary benefit of DOT 4 brake fluid is its increased boiling point, providing greater protection against brake fade and diminished performance due to overheating. However, under high-stress scenarios such as hard braking, the boiling point of DOT 3 brake fluid can be exceeded, resulting in damage to the brake system components. DOT 4 Fluids both have higher Dry Boil Points and wet boil points which are required in brake systems that produce more heat due to faster speeds, heavier towing loads, etc. It’s also important to follow the manufacturer’s instructions regarding the recommended brake fluid replacement interval.