Ubiquiti US-16-150W 150 W 16 Port UniFi PoE Switch

Product Information

Higher PoE budgets. The 2nd generation non-pro models are fanless and have very limited PoE budgets

The main point I’m trying to make here is that if you expect a UniFi switch to be your only layer 3 device, you’re going to be disappointed. Adding layer 3 at the switch level usually doesn’t make sense in small to medium sized networks, and I wouldn’t recommend relying on UniFi layer 3 switches in general. If you’re working on a large multi-building network with high requirements, UniFi may not be the best fit. I’ll cover this in more detail if I ever get around to finishing my USW-Enterprise-8-PoE review.

EdgeSwitches have an optional web interface overlay called UISP, which is similar to the UniFi controller. UISP is limited when it comes to EdgeSwitch configuration, and it doesn’t have every option that the device’s individual web GUI or CLI has. Think of UISP as an easy way to monitor all of your AirMAX, LTU and EdgeMAX devices, rather than a single interface for configuring everything like the UniFi controller. Note: This can only be done by the account owner and requires them to have previously signed into the mobile app while the device was managed. It’s also worth pointing out that PoE devices don’t always consume their maximum rated power draw. The spec sheet will specify the maximum amount the device can use, but during normal operation they won’t use that much. For example, the U6-Pro requires 802.at PoE+ or 48V passive, and maxes out at 13W. During normal use it usually consumes around 5 to 7 watts of power. PoE passthrough is when a PoE device can receive power and also pass PoE to another downstream device. A common example would be a 24 port PoE switch, feeding an In-Wall-HD access point, with a video camera connected to the In-Wall-HD. The key part is that all three devices are drawing their power from the 24-port PoE switch. In situations like that, you need to be especially careful about what PoE support your switch or voltage and amperage of your PoE injector.

Most UniFi switches operate at layer 2, meaning they can handle VLANs but cannot act as a router. The 2nd generation pro and enterprise UniFi switches have some layer 3 features such as static inter-VLAN routing and DHCP, but they require a separate router or firewall for everything else. UniFi L3 switches can’t compete with a true enterprise product from a vendor like Cisco or Juniper. UniFi switches are a fraction of the price and don’t require licensing, so they compete in different markets. As with all network design and purchasing decisions, what matters most is your budget and your use case. Ubiquiti calls them “Gen2” but I am going to call them 2nd generation. Whatever you call them, Ubiquiti’s newer UniFi switches split things into a few tiers. There are models which replace the 1st generation switches, and the higher pro and enterprise tiers.

Specifications US-16-150W

Selecting this option will unmanage the device from your UniFi Console and restore the device to a factory default state. UniFi Consoles To cache the firmware in your controller you open your controller and go to the settings (lower left gear icon). Search for Firmware and select Device Firmware Cache (or select Updates > Firmware in the settings menu) This will occur if the device was managed by another instance of a UniFi application. This includes cases where the UniFi Console (e.g., Dream Machine Pro, or Cloud Key) was factory restored, because the UniFi device still considers itself as being managed by the 'old' application console, prior to restoration. Passive 24V and 48V PoE — Ubiquiti’s standard, mostly used on EdgeMAX, AirMAX, and older UniFi devices The US-XG-6-PoE has four 1/2.5/5/10 Gbps RJ45 Ethernet ports with PoE++. It also has two 10 Gbps SFP+ interfaces.