120MM X 10M WET ROOM SYSTEM WATERPROOF TANKING TAPE EVERBUILD AQUASEAL JOINT 12CM

Product Information

Wear protective overalls and a mask as the chemical compounds in cementitious slurry can be harmful to eyes and skin. Both wall tanking methods that we’ve outlined are effective choices for dealing with damp walls above ground. Cementitious tanking slurry - a paint-like substance that has been chemically engineered to form a protective barrier when applied to internal walls.

More often than not, walls below ground like basements, cellars and sunken garages are surrounded by earth. This means that moisture, water pressure and ingress are serious considerations. How do you tank a wall?

Aquaseal Waterproof Tanking Tape 10MTR Self adhesive joint corner sealing tape. Easy to apply with pre-cut release liner. Tanking slurry is supplied as a powder that you will need to mix yourself. It is essential that you apply tanking slurry with the proper direction, following manufacturer’s instructions. Tanking is the most important part of any wet room installation and it’s crucial that high-quality waterproofing products and systems are used to ensure optimum performance and longevity. At CCL Wetrooms, thanks to over 30 years’ experience in wet room design, manufacture and specification, we specialise in the supply and installation of highly effective waterproofing systems. Our knowledge ensures the most effective waterproofing systems are used throughout domestic and commercial wet room projects. Tanking slurry can be used on a damp wall above ground to stop the passage of water. Ideally, you will want to identify and resolve the source of damp before applying it. Seal off any gaps - Using waterproof tape, make sure to cover up any areas where water ingress may squeeze through such as the joins between membrane sheets, around fixing plugs, or where the membranes reach the floor or cavity drainage system.

Not just suitable for indoor use, this Waterproof Butyl Tanking Flexible Tape can be used on your roof, balconies, terraces and so on, to protect your home from the elements outside. Withstanding extreme temperatures, this tape is perfect for use on both the interior and exterior of your home. The walls of a building can become damp for many reasons: building faults, penetrating damp, plumbing issues, and rising damp. Ultimately, damp walls are bad news. They can lead to structural issues as well as causing health issues. It also damages decoration, and looks and smells bad. Damp in walls is commonly caused by penetrating damp and in some rare occasions rising damp. Below ground, you may experience damp walls due to water ingress. This occurs due to hydrostatic pressure being exerted on the earth-retaining walls. Penetrating damp Introducing the Self Adhesive Butyl Tanking Tape for Wetrooms and Shower Rooms by Nassboards, the leaders in Kitchen, Bathroom & Wetroom Waterproofing and Tiling.

Magna Clean

Easy to apply with pre-cut release liner allows for one side to be applied to the corner board then simply pull away the release liner and the reinforcing tape will fit tightly in the corner However, walls below ground are often subject to hydrostatic water pressure and any flaw in the application of cementitious tanking can have serious consequences. Type C cavity drainage systems should be a consideration.