Clover Chemicals 502 Acid Wash 80 Extra Strong Acidic Cleaner, 5 L, Pack of 2

Product Information

While acid washing/etching does technically clean a surface by removing contaminants, it is really intended to create a surface profile and should not be used as a general-purpose cleaner. It should only be used if you intend to strip the surface, open the pores, and apply a new coating. And even then, it should be used when grinding the surface isn’t possible (see more below). Zimmerman, Keith. "Cellulase enzymes won't leave your laundry washed up." Bobbin Dec. 1993: 62+. General OneFile. Web. 9 Aug. 2013 As acid is a harsh chemical, it is recommended you start with a mix of 1:20 acid to water. Always test a patch in a discrete area before applying to your entire surface. If required, the ratio can be increased to achieve a heavier clean or the process repeated. Acid washing and acid staining are often confused, but the two processes are very different and are used for vastly different purposes. It’s important to understand the difference.

For etching floors, use 1 part Acid Wash 80 to 40 parts of water. Apply to the surface, leave for a few seconds to act, then rinse away with water.If water beads up on the surface, the acid wash may not work correctly. [3] X Research source Degreasing should solve this problem. Carpet & Fabric Care Carpet Deodorisers, Neutralisers & Sanitisers Carpet Stain & Spot Removers Carpet Extraction Detergents Carpet Cleaning Defoamers Carpet & Fabric Presprays & Traffic Lane Cleaners Carpet Cleaning Additives & Problem Solvers Leather Care Products Carpet & Fabric Protectors Carpet & Fabric Cleaning Accessories Fabric & Upholstery Cleaners Encapsulation Products To reiterate an important point: Before you begin the etching process, be sure to take all the precautions necessary to protect yourself and your surroundings. Acid is a caustic product that can cause harm.

Vinegar is a very mild acid, so it would not be effective for acid washing your concrete surface. Downsides of acid washing concrete for surface prep Phosphoric acid creates less fumes. Use it in rooms that contain stainless steel or other acid-vulnerable metals. It's also a good choice if you're just cleaning off mineral deposits. Turn your jeans over every 20 minutes. Set a timer to make sure you're turning them over regularly. Always use gloves when handling the jeans. Turning your jeans over regularly will make the acid wash effect even throughout. Looking for ahighly concentrated acidic cleaner for the removal of severe water scale and rust marks? Put on your protective gear. Bleach is caustic, and it can cause irritation to your eyes, skin, and lungs. It can also discolor your clothes, carpet, furniture, and other surfaces. Make sure that you put on goggles, gloves, and some old clothes before you begin. [13] X Research sourceWhen it stops fizzing, it’s time to neutralize the surface. It’s important not to leave the acid on the surface for too long. If you do, you run the risk of remaining on the surface and negatively impacting your concrete or the coating you’re planning to apply. Standard lab attire, lab coat, full-length pants or equivalent, and fully enclosed shoes. Chemical-resistant apron may be worn over the lab coat to protect against splashes. Eye & Face Protection Select an old pair of jeans. Acid washing jeans will remove a lot of the color. You should not acid wash a pair of jeans you are attached to. Select an old pair of jeans for the acid washing process. Keep collections to yourself or inspire other shoppers! Keep in mind that anyone can view public collections - they may also appear in recommendations and other places.