3M VHB 4611 Double Sided Adhesive Tape - Designed to create durable and reliable bonds - 19 mm x 3 m, Thickness 1.1 mm, Grey & 5952F Double Sided Adhesive Tape - 19mm x 3m, Thickness 1.1mm, Black

Product Information

Adhesive Tapes are used in many sectors of industry on account of their excellent performance. They offer the unique advantage of economical, fast and clean processing compared with other mounting systems – both manual and automated. To ensure that the performance potential of our adhesive tapes is fully utilised, please follow the processing instructions listed below: Using this method it delivers a speedier application than mechanical fasteners, therefore replacing rivets, screws, bolts and spot welds. The heavy-duty bonding tape is viscoelastic in nature, giving foam stress relaxing and energy-absorbing properties – but what does this mean? Avoiding these forces causing failures over time, this happens with mechanical fixings, and leads to further maintenance and increased cost. If you already didn’t need an excuse to use this tape in your industry its durability is further increased by its resistance to solvents, moisture and UV, reducing wear unlike mechanical components, which can be easily corroded. UHB Bonding Tape Sizes

Short-term temperature tolerance up to 260 °C, with an operating temperature tolerance of up to 150 °C Specifically designed to bond Plasticised PVC sheeting and rubberised materials, Suitable for bonding all plastics. Glass Clear UHB Acrylic Tape PA - polyamide is high-strength and impact-resistant. Its abrasion and wear resistance combined with excellent sliding properties make it a preferred construction material in machine or vehicle construction. Because of its high mechanical strength, it has now even displaced many metal components in vehicle construction - sometimes reinforced with carbon or glass fibres. But PA is not easy to bond. High bond strengths of PA materials require the use of special pre-treatment methods or specially developed, reactive adhesives. Further information. Double-sided acrylate foam adhesive tapes for a wide range of applications are available on the market. They're made of closed-cell acrylate adhesive for demanding material combinations or critical plastics with low surface energy such as PE or PP. These are able to absorb forces well and are therefore permanently resistant to tensile, shear, splitting and peeling forces. They're suitable, for example, for car mirror bonding or for the bonding of mouldings and decorative trim. Thin bonding lets your design shine without bulky fasteners by using a virtually invisible industrial-strength bond to attach materials. Using a tape rather than a liquid adhesive allows you to customize the tape to the precise shape you need for the final design, as well as giving you production flexibility by leaving the liner in place until the second substrate is ready. Double coated or adhesive transfer tapes provide shear strength, conformability and high initial adhesion and have industrial applications in electronics, auto interiors, signage and graphics, sporting equipment and much more.Mechanical pretreatment by brushing, grinding, sanding or sandblasting - this changes the roughness and the size of the surface area effective for the bond. At the same time, loosely adhering reaction products, polishing and sliding agents and stabilisers are removed. Acrylic foam tapes, whose adaptable acrylic foam absorbs tension, dampen vibrations and compensate for different, material-dependent temperature expansions. These are suitable for metal/plastic bonding and are used in automotive applications, for example, for bonding decorative and side protection strips, plastic cladding, reflectors and mirror glass. Designed for use with medium and high surface energy materials like metals, polyimides and polycarbonate

Plastic components are often fixed with the aid of adhesives to prevent them from slipping during further process handling. Acrylate-based adhesives in particular usually adhere very well to many plastics. They have a strengthening and supporting effect for load transfer and stress reduction. Acrylic adhesives, which are also used for permanent bonding, are characterised by short processing times and high strength to many plastics and elastomers. These adhesives achieve, for example, as 2-component adhesives on low-energy plastics such as PC, PMMA, PVC etc., good shear and peel strengths as well as good impact strength under dynamic loads. From the 3M Scotch-Weld series, even acrylic adhesives have been developed in the meantime, which provide good results on difficult to bond plastics with low surface energy without any surface preparation or primer. The transparent plastic SAN from the group of styrene-based plastics is often used as a material for greenhouse or industrial glazing as well as shower cabins because of its weather resistance, rigidity and scratch resistance. Depending on the requirements, a wide range of high-performance adhesives is suitable for material bonding. Further information. There is very convincing evidence that Heavy duty bonding tape in fact rivals the tried and tested method of riveting and conveys the following benefits: Cleaning and degreasing the plastic surface of loosely adhering dust, oil, grease and separating and processing agents with water or solvents - this does not change the structure of the surface. Cleaning can be carried out by immersion or spraying. Degreasing is done with organic solvents or by pre-drying in the oven. Foams are quite common in everyday life: They are used in everything from upholstery and mattresses to insulation materials. They are based on a wide range of plastics as raw materials. However, not every adhesive is suitable for every material. In view of the wide range of variants, it can therefore be useful to always test how the adhesive behaves on small samples of the material beforehand. Further information.The cold-crosslinking HTV silicone rubbers are plastically deformable materials which are used, for example, as cable sheathing, for electrical insulation or for sealing and damping purposes. The flowable, red silicone rubber (RTB/HB) has a high heat resistance and low elasticity. They are used as mould construction material for casting moulds for low-melting metals where high hardness is required.