FireAngel FA3313 Carbon Monoxide Detector and Alarm with 1 Year Replaceable Batteries (Replacement for FireAngel CO-9B)

Product Information

Free-standing installation: The base of the alarm has been designed to allow it to stand freely on a shelf where required. Using a soft brush adaptor, your vacuum or your hairdryer on a cool setting, run along the edges and face of the alarm. Please do not use any solvents or cleaners on your alarm as they may cause damage to the sensor or circuitry. FireAngel’s new range of carbon monoxide alarms use intelligent sensing technology for a rapid reaction to rising levels of CO. The alarm comes with 2 X AA batteries that can be replaced once the low battery chirp can be heard.

However, if you notice any visible damage to the alarm during cleaning, including any severe staining or dust, we recommend you replace the alarm as the sensor within could be damaged. Does cleaning my alarm really help stop the beeping? With a multi-functional LCD digital display and array of exclusive features such as Alarm Memory, Ventilate Instruction, Quiet Self Test and Environmental Sensing, the FA3322X4 offers the highest level of CO detection for your home. If your alarm is not a sealed battery alarm, then install the batteries following the steps within the manual. Our FA3322X4 Carbon Monoxide Alarm with digital display comes with a sealed, tamper proof battery that will last the lifetime of the alarm. The sensors within the unit will deteriorate after 10 years, so to ensure you’re protected we recommend you replace the unit after this time. We do not recommend a smoke alarm to be fitted in areas where excessive dust or dirt could contaminate the sensing chamber, making it over sensitive. It is also not advised to fit alarms in bathrooms, shower rooms or any other very damp and humid areas, where moisture can cause unwanted alarms.For alarms located in the same room as a fuel-burning appliance (for both wall and ceiling mounted alarms) the following applies: Read our handy guide for more information on correctly installing your alarms or discover why your Pro Connected alarms may be beeping in our guide. Dust contamination: How do I clean my alarm?

The FA3313X4 is the ideal replacement for end-of-life FireAngel CO-9B alarms, featuring the highest level of CO detection for your home. With intelligent CO sensing technology and built-in features including Sleep Easy function and Alarm Memory, this alarm will keep your family protected from carbon monoxide. FireAngel’s FA3322 digital carbon monoxide alarm features many icons on the LCD screen. View our guide below to help you understand what each represents. The alarm’s high sensitivity mode will be enabled if the alarm predicts CO levels will increase to or above 180ppm for fast reaction to rising CO levels.With the alarm memory function, the red LED will flash to provide a visual indication of a previous CO alarm activation. Carbon monoxide alarms in rooms with sloped ceilings should be located at the high side of the room.

Tenants, do you know your rights as a renter when it comes to CO alarms in your home? The Government announced its response to a consultation on the use of smoke and carbon monoxide alarms in domestic properties. Known as the ‘ Silent Killer’, CO occurs when fuels burn incompletely, with common sources being boilers, gas fires and hobs and solid fuel burners. However, carbon monoxide can also pass through walls, so you would also be at risk if a neighbouring property had a leak.FireAngel smoke, heat and carbon monoxide (CO) alarms are designed to be as maintenance-free as possible, however there are a few steps that must be followed to ensure your alarms continue to perform correctly.