TP-LINK TL-PA8010P 1200 Mbps Gigabit Passthrough Powerline Adapter UK Plug – Single Pack (Renewed)

Product Information

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

from the main adapter in the garage, not the same ring main, a single spur from the main consumer unit. Plug and Play - Set up your powerline network and start enjoying fast, seamless wired/wireless connections in minutes Powerline Adapters are open to huge variances in performance due to many factors such as your house wiring, other equipment plugged in and distances between adapters. Our testing process has been designed to create repeatable tests in the same location to compare different adapters against each other. Feature Filter: All Q&A of functional explanation or specification parameters User Application Requirement Configuration Guide Troubleshooting FAQs Note: If the Powerline LED does not turn on, reset each powerline adapter to its factory default settings. Refer to FAQ-Q2 for detailed information.

2×2 MIMO Technology for Efficient Transmissions

Connect your wired device, such as a computer or game console, to the powerline adapter via an Ethernet cable.

For example, I’ve extended my network using the Plug & Play method. Now I want to secure my network. AC1200 Dual-Band Wi-Fi - Extends ultra-fast dual-band Wi-Fi with speeds of up to 867 Mbps on 5 GHz and 300 Mbps on 2.4 GHz * Plug the powerline adapter directly into a wall outlet. Do not plug the powerline adapter into a power strip, extension cord, or surge protector. Tips: We recommend that you plug in your powerline devices next to each other, or as close to each other as possible when pairing. Your settings will not be affected. The devices can be relocated to where they are needed once pairing is complete.Press the Pair button on any of the powerline devices for 1 second. Its Power LED should start blinking.

How to add an extra Powerline adapter to the existing Powerline network by adding the the powerline key on the Utility(Green UI) 06-28-2022 103637 EasyMesh-Compatible - Flexibly creates a Mesh network by connecting to an EasyMesh-compatible router for seamless whole-home coverage HomePlug AV2, IEEE 1901, IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.11b/g/n (2.4 GHz), IEEE 802.11a/n/ac (5 GHz) Compatible with all HomePlug AV and AV2 Standard Powerline adapters. This product may not be compatible with routers or gateways with firmware that has been altered, is based on open source programs, or are non-standard or outdated.

How to set up a new secure wireless network using Powerline ac Wi-Fi Kit by Pair button 06-28-2022 87310 The terms “AV1200” and “1200Mbps” are derived from applicable specifications and refer to the theoretical maximum physical-layer data transfer rate. Those terms are used on this product solely to indicate its compatibility with other “AV1200” or “1200Mbps” powerline devices. Actual data speeds vary and may be limited by the product’s Ethernet port and other network conditions such as data traffic, electrical noise, and wiring issues.For better performance, powerline devices should be deployed on the same electrical circuit and rated for the same HomePlug standard. A minimum of two powerline devices are required to establish a powerline connection. If you are uncertain about your network conditions, you should consult an IT professional to assist in selecting a networking product. Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. ( Normally Vx.0=Vx.6/Vx.8 (eg:V1.0=V1.6/V1.8); Vx.x0=Vx.x6/Vx.x8 (eg:V1.20=V1.26/V1.28) How to set a new Powerline Network Name to secure your whole Powerline network using the tpPLC Utility on Windows 06-28-2022 116143 Whilst not an item you are likely to have on display the TP-LINK PA8010P KIT is still fairly attractive. With an all-white, hard plastic build and a modern rounded design it won't stand out too much or look too unsightly. Our only issue, which we have had with most Powerline Adapters, is that the Ethernet port is on the top which makes it slightly difficult if you are one that likes to have as little cable on show as possible. We aren't sure why the various manufacturers keep putting the ports on the top, but hopefully this will be changed soon.