Lithofin MN Stain-Stop Impregnator Sealer For Artificial & Natural Stone 250ml

Product Information

Surfaces are safe to use after several hours. Complete effectiveness of the treatment will take approx. 5 days. It is highly suitable for weak to medium absorbent natural stones like granite, gneiss, quartzite, slate and limestone with rough to honed surfaces. It is also suitable for polished stones, indoor and outdoor. Please Note: impregnated surfaces cannot be treated. Marble and limestone remain sensitive to acid.

A special product from the LITHOFIN-Range for marble, natural and engineered stone (MN). Lithofin MN Stain-Stop is a ready-to-use, solvent-based impregnator that contains high quality water and oil resistant components. Please Note: Non-absorbent surfaces cannot be impregnated. Glass, ceramics, wood, and other surfaces sensitive to solvents must be protected against splashes. Lithofin Stain Stop is perfect for use on wall and floor surfaces in the kitchen and bathroom, as well as on table tops, window sills and other sensitive surfaces. Please Note: marble and limestone will remain sensitive to acid. Lithofin Stain Stop lasts up to 5 years on outdoor surfaces. Indoors the durability depends on the care products used. Strong de-greasing or layer forming products are unsuitable. Heavily used surfaces such as kitchen counters and vanity tops should be touched up once a year with the solvent-free STAINSTOP W. Most of the solvents evaporate within two hours. Floors can be walked on after 12 hours. The impregnator is fully effective after 24 to 48 hours.Many products on the market have been designed to enhance and "protect" the surfaces of stone, tile, and grout, including sealers, finishes, colour enhancers, and waxes. As the name implies, sealers actually seal the surface tight against chemicals, water, and other contaminants. We are glad you are here and Stone Doctor Australia gives you one of the best sealers from a Lithofin brand; Lithofin MN Stain-Stop. Remove all remaining product residues within 30 minutes using a dry cloth, do not allow to dry on the surface. Without prior experience or in cases of doubt, try the product in an inconspicuous area prior to use. On large surfaces, work in small sections of 10 to 15m². Lithofin Stain Stop PLUS sinks into the stone and reduces the capillary absorbency so water, oil and grease can no longer penetrate the surface. These materials remain on the surface and can be wiped off before they cause stains. In addition to protecting the stone, it darkens it – thereby invigorating the colour structure. For invisible protection against staining and for facilitating maintenance of all-natural stone surfaces, including polished marble.

Application Temperature: the temperature of the surface should be between 10°C and 25°C. Switch off under floor heating. Apply Lithofin MN Stain-Stop generously until the surface appears wet. Allow the product to penetrate for approx. 15 minutes. Redistribute the excess product and remove puddles and streaks. On highly absorbent materials or on dry spots more product may have to be added. Remove all remaining product residues within 30 minutes using a dry cloth. On large surfaces use a squeegee to remove excess with a polishing machine and a white pad. Lithofin MN Stain Stop does not affect the appearance of natural stone. Lithofin MN Stain Stop greatly reduces the water absorbency of natural stone and only slightly effects the water permeability.Attention! the liquid product must sink into the stone. Do not allow the product to dry on the surface. Wipe off excess product within 15 min.