TOPWAY Tile Leveling System 400pcs Pack 3mm Levelers Spacers for Building Walls Floors

Product Information

It is designed to be connected to the VITE Cap so that you can tighten the cap without having to hold the washer with one hand. Once the adhesive is set, the protruding part of the support has to be separated from the base, which is embedded beneath the tile edge. The Genesis GLS Easy Wedge is an innovative tile levelling system allowing accelerated installation. Insert the Raimondi Tile Levelling System wedge in the clip (base) slot, using the Anti-chip/scratch plate if required, paying attention not to pass the breakpoint. To facilitate this operation, the use of the traction-adjustable Raimondi Tile Levelling System pliers is recommended.

Raimondi Tile Levelling System - Tiling Supplies Direct

It features a 8mm hexagonal shaft which makes it suitable for use with all cordless screw drills with a chuck fitting. The Raimondi Tile Levelling System is comprised of a thin plastic clip that is designed to be fitted in a grout joint between two tiles.Once the adhesive is set, remove the cap by beating it with a Raimondi White Rubber Mallet to avoid marking the tiles (or with the foot). A consistent tightening torque setting on the drill clutch can be utilised to achieve a consistent perfect level across the entire surface.

Genesis Easy Wedge Levelling System 3mm Bases | Tileflair

The Raimondi VITE Tile Levelling System is supplied as individual components, which are available in multiple different pack sizes.

The eco-friendly system is formulated especially for landscaping professionals and is ideal for use on porcelain installations. Spacer Clips 12-20 x 1700, 2mm Spacer Clips 3-12 x 250, 2mm Spacer Clips 3-12 x 500, 2mm Spacer Clips 3-12 x 2200, 3mm Spacer Clips 3-12 x 250, 3mm Spacer Clips 3-12 x 500, 3mm Spacer Clips 3-12 x 2200, 3mm Spacer Clips 12-20 x 200, 3mm Spacer Clips 12-20 x 400, 3mm Spacer Clips 12-20 x 1700, 4mm Spacer Clips 3-12 x 250, 4. The Raimondi Tile Levelling System uses special traction-adjustable pliers that are available in two different versions, one for floor applications and one for wall applications. The Raimondi VITE Tile Levelling cap is then threaded onto the clip and tightened until the tiles are level. Made from solid durable red PVC, they can be re-used over and over again and are perfectly designed to work with both Mustang and Mustang +Plus base clips.