Pros-Aide I Adhesive (1 oz)

Product Information

Swabs are great for edges, as they can be used in a rolling action, allowing edges to be lifted up by the rotation of the swab. Also, you can use swabs with solvent to dissolve the edges of the cap plastic barrier. Skin Illustrator glazing sprays and gels water based and translucent perfect for around the eyes and to create realistic sunburn, bruise effects! To paint your prosthetic, you can use just about anything like water or alcohol activated paints to creme-based paints and your usual beauty products! Brittany chose a cream foundation shade from the Graftobian Appliance RMG Wheel in Derma Shades to match her skin tone and applied it with a brush before setting it with powder. Occasionally bubbles will appear even at lower drying temperatures, and even when no direct airflow is on the surface of the piece. In these cases it seems most likely that the mixture contained too much remaining water and would be better off dried very slowly at room temperature. Remove the pieces from the moulds, leaving them on the acetate- if the pieces are right they should just kind of peel right out. I have found that this is where your sculpting issues show up- some bits are perfectly easy to remove and other shapes just don’t work as well.

pattern, and they begin to form a continuous, cohesive film. As this occurs, the polymer spheres, composed of long chains of acrylic, actually deform and partially combine with one another in a process of film formation called coalescence. This came about through the very human habit of assuming that what seems obvious must therefore be true. (Ha! Major FAIL!!)Pros-Aide® is the base for PAX Paint™– a combination of water-based colors with Pros-Aide®. PAX Paint™ is a flexible color with high bond strengths used for the skin and many surfaces. Here’s the basics, but for a proper tutorial I recommend you get yourself one of the excellent instructional books and dvds that are available. Todd has helpfully posted a How-to for 3D Prosthetic Transfers, with pics, in the Photos section on this group. There are two types of appliances that have come into widespread use over the last few years. Firstly, the GFA or ESA, (which stands for Gel-filled Appliance or Encapsulated Silicone Appliance), and secondly the Pros-Aide Transfer, (sometimes referred to as Tinsley Transfers after one of the early developers of the technique). The developers of these techniques were seeking what was once thought impossible: appliances that would be both practically invisible on close examination, to stand up to the high quality cameras of today, whilst also being robust enough to stand up to the rigours of water, mud, blood, sweat and action filming. If you are making wounds, etc, you can do a bit of pre-painting with alcohol activated inks, right into the mould, onto the plastic layer. (*Be very careful as the alcohol that is in the inks can dissolve the plastic.)

You can also use PVP/VA Copolymer (70% Polyvinylpyrrolidone & 30%Vinyl Alcohol). You can find it at just about any place that sells supplies to make home made lotions, makeup, hairspray, among other things.” Everyone will have their own selection of preferred materials, but here’s some of the teams at Mouldlife. Pros-Aide, the “original” water-based adhesive for the skin. It adheres for long periods without irritation. Pros-Aide® is the leading adhesive used for medical prosthetic applications. Pros-Aide® is the standard in the industry for adhering appliances and other make-up components to skin. It is safe to use on all skin including sensitive areas. It gives a strong bond and has high water resistance. It is non-toxic and completely safe.Bonus: It was written with Todd Debreceni, author of Special Makeup Effects for Stage and Screen: Making and Applying Prosthetics . Adhesives Try to minimise perspiration by keeping the performer as cool as possible and hydrated. Usually this isn’t something you have a whole lot of control over, as heavy costumes, lights and physically active performances are all contributing to the heat build up. To perform this technique, take a splatter brush or a toothbrush, and dip it into an alcohol activated paint that has been sheered out with an activator. She created a reddish shade to match the tones in her complexion.

So lets start settling the mind by establishing a basic point – there are essentially two types of glue used with prosthetics. These are: Occasionally there have been queries about adding an extra plasticizer to the mix. Previously used products have been removed from common use for safety concerns so there has been some exploration of alternatives. In some research, Citric Acid added to a blend of Guar Gum and Polyvinyl Alcohol increases elongation and tear strength of the resultant films dramatically. It may be worth experimenting with adding Citric Acid and/or Polyvinyl Alcohol to the transfer mix in small proportions, as they are both non-toxic Also, thinning the adhesives down so the bond strength is appropriately reduced is helpful. In the case of water based acrylic adhesives, a 10-50% solution of water will do it. This is often an issue in makeup schools where appliances may only be worn for a short time before being removed. The glues are at full strength, having not been perspired into by a sweaty stunt performer for eighteen hours.

Prepping for Application

But Spirit Gum does pose one main problem. It never works for me as a long lasting prosthetic adhesive. That’s enough to cover tons of applications, so that one bottle can last someone like me many, many months.

Foam latex may absorb remover, so be sure to apply it onto where the skin is attached to the appliance, as the foam may soak it up instead.

Adhesives

If the makeup has to be applied many times in a row, you need to take care to reduce irritation as much as possible. This may mean taking rest days, thinning the glue down and using good moisturising and face creams. Most appliance makeups are wanted once or twice, but regularly appearing characters may well need to have rest days from prosthetics as part of their routine. Skin effects e.g. scab paste, wound filler, fresh scratch, pus, vomit, chapped lips, rigid collodion, old age stipple When choosing a board it should be a textured laminate, NOT a perfectly smooth surface, to help give realistic micro-textured edges to the pieces.