Blanking End Cap 300mm for UPVC Plastic Fascia & Window Boards Square Edge

Product Information

For a neat and sturdy installation, use our M4x40 Stainless Steel Wood Screws. Easy to install, with corrosion and wear-resistant properties, these Screws provide a long-lasting fit. Secure using a Phillips PH2 Screwdriver Bit. Even when painted, cut ends look unfinished. The colour may help them blend in, but it’s still a cut end. Glued on cap veneer Aside from this, the plastic isn’t always water tight, meaning moisture, humidity and rain may make it into the core of the board. While this isn’t a usual thing, it is something to be on the lookout for.

Fascia repair – capping over fascia or full replacement fascia Fascia repair – capping over fascia or full replacement fascia

While working in Salisbury, North Carolina, a sub-divison wanted some craftsman style homes. This project included 115 homes that would have aluminum fascia capping installed. All the homes were wood exterior.If you are performing the end finishing as a DIY project you need to ensure you have the skill, time and tools needed for the job. Likewise, if you are hiring out the project to a professional , you want to ensure you hire a competent contractor and budget for the labor costs. Price & Warranty Our capping boards come in two enduring styles in eight different colours and eight widths ranging from 150mm to 450mm. Installing a fascia is a way to connect and cover the board end openings. As the name suggests, the board is a facing board that covers imperfections and makes a single, smooth appearance. Not being attached like some other finishing options, there is no conflict between material and movement. Fire rating Foam profiles Tested to BS476 Part 7:1997 Class 1 surface spread of fire. Woodgrain profiles do not carry a fire rating Rigid profiles Tested to BS476 Part7:1997 Class 1 surface spread of fire

Boards | Fascia Boards | Skirting Board Covers Soffit Boards | Fascia Boards | Skirting Board Covers

The mitre cuts are also problematic with picture framing. As the boards expand and contract during the day and seasons, the mitre joints will open and close. What once was a beautiful mitre joint joints becomes an ugly gap between boards. RAISED FASCIA BOARD Capping over is a cheaper roofline repair option as the methods used are less substantial. It should only be considered if the existing timber fascia is in very good condition and free from rot. Attaching a PVC fascia board to rotten timber may cost you more in the long run! Full fasciareplacement If the tension device is not installed properly, or becomes unattached from the mounting surface, the shade will be rendered partially inoperable. If installed properly, the tension device will prevent the creation of a hazardous loop and will maintain tension on the bead chain. The tension device and label require tools to be removed. Testing Endcaps are available in two sizes: 3¼" x 3¾" (83 mm x 95 mm) and 4½" x 4½" (114 mm x 114 mm). Larger size is available for dual roller shades.Other than expanding and contracting, aluminum is quite resilient against the elements. If the aluminum is nailed correctly to a solid fascia board, it can last virtually forever. If the seams are not exposed to water getting behind them and the roof is in good health, fascia capping can be great.