Brasso Metal Polish Wadding, 75g

Product Information

These wadding pads have been impregnated with cleaning fluid meaning there is no need to get an extra cloth dirty. Always wear gloves and a mask– Brasso can cause skin irritation and inhaling the fumes may lead to drowsiness. Below you’ll find steps on how to use Brasso in both liquid and wadding form. Skip to the section that applies to the Brasso you’ve bought. General tips to think about before you start using Brasso: The label of Australian Brasso lists "Liquid Hydrocarbons 630g/L; Ammonia 5g/L", whereas the material safety data sheet for Brasso in North America lists: isopropyl alcohol 3–5%, ammonia 5–10%, silica powder 15–20% and oxalic acid 0–3% as the ingredients. [4] However, the Australian version contains kaolin instead of silica for abrasives. [5]

Use small amounts of Brasso at a time, and add more product as you go– If you use too much Brasso you run the risk of it dripping everywhere as you use it, especially the liquid form, this is wasteful. Church, Roy A.; Andrew Godley (2003). The Emergence of Modern Marketing. Routledge. p.30. ISBN 0-7146-5390-X. Brasso has been used by watch enthusiasts to polish scratches out of acrylic crystals on watches. [12] Regularly wipe/buff the already treated surface with a new clean cloth to see how you’re polishing exercise is going.When you’re done using your Brasso you need to store it away in a safe place, that is out of the reach of children and pets. Don’t leave a job half done – Once you start using Brasso to clean a surface, you should finish cleaning the surface in one go. If you leave the surface to dry, you’ll have Brasso residue. And as a consequence of this, items might not look shiny and evenly cleaned. Anything of a nature that for hygiene or associated health and safety - this includes the Outdoor Spas, Mattresses and Divan Sets The online data sheet for Brasso wadding in the UK lists the ingredients as C8–10 Alkane/Cycloalkane/Aromatic Hydrocarbons, Quartz, C14–18 and C16–18 unsaturated Fatty acids, Kaolinite, Aqua, Ammonium Hydroxide and Iron Hydroxide. Brasso liquid lists a slightly different mix; C8–10 Alkane/Cycloalkane/Aromatic Hydrocarbons, Quartz, Kaolin, C12–20 Saturated and Unsaturated Monobasic Fatty Acids, Aqua and Ammonium Hydroxide. Also available are ingredients in a discontinued recipe for Brasso. Wadding: C8–10 Alkane/Cycloalkane/Aromatic Hydrocarbons, Quartz, Ammonium Tallate and Colorant. Liquid: C8–10 Alkane/Cycloalkane/Aromatic Hydrocarbons, Quartz, Kaolin and Ammonium Tallate. [6]

For use on brass, copper, stainless steel and chrome, this product has been specially designed to provide excellent results and a longer lasting shine. For the historical county of the Kingdom of Hungary, see Brassó (county). For the county seat thereof, see Braşov.

Can You Rinse Brasso Off with Water?

This is not intended to be a full statement of your rights under the Consumer Contracts Regulations. Full details of your rights are available from your Local Authority’s Trading Standards Office. How To Return A Product If you do have Brasso residue leftover, either keep buffing it off the surface or use a clean cloth to remove it. You should remove Brasso from small nooks before it dries– Use a small, slim tool that’s wrapped in a cloth to tease the excess Brasso from crevices. Leaving the Brasso to dry will just make it harder to remove, and you might not end up with the sleek finish you were after if there’s Brasso residue all over the place.