Joined in 2023 
82 
63 About this deal
By depressing the power switch, conduct a positive or negative battery current to the probe tip for testing the function of an electrical component without the use of jumper wires.
PS100 follow and locate short circuits without wasting fuses. The tool's long cable allows you to test along the entire length of the vehicle without constantly searching for suitable vehicle grounds. Power Switch – Allows you to conduct a positive or negative battery current to the tip for activating and testing the function of electrical components. Reduce Battery Misdiagnosis: INTERSTATE Statistics show that 50% of returned batteries are good and just need charging. With adaptive conductance technology adopted in the battery tester BT608E, the diagnostic accuracy rate reaches 94.11%, which is higher than conductance profiling with an accuracy of 92.06%. To perform testing and display test results the Autel MaxiBAS BT506 (English Version) must be used with some Autel Tablets (Tablets require “Battery Test” icon) or Other Smart Device (Free iOS or Android Apps Available).BT608 Battery Tester can test battery and also 12- and 24-volt Cranking/Charging Systems( starter and alternator).
Autel PowerScan PS100 circuit tester contain 20ft (extendable) cable provides excellent accessibility to test along the vehicleIf vehicle power is interrupted or lost after battery replacement, the position settings of some vehicle components could be lost and would fail to work properly. The battery test scanner BT608E can help DIYer and mechanics reset the electric appliances and systems like sunroof reset, lane-departure warning system and Pre-Collision system, and Emission Inspection and Maintenance program with step-by-step reset battery instructions.
The tool LED and LCD pull no more than 1 milliamp of current,therefore when using it as a test light or multimeter it is computer and airbag safe. However, pressing the power switch is a different story. When you press the switch forward, you are conducting full battery current to the tip of the probe. There is a nice safety feature built into the tool. Simply connect the extra ground lead to the tool and press the power switch forward until it trips the circuit breaker.This will prevent power from going to the tip but still allow you to use the tool as a multimeter. When you are away from computer components, simple press the reset button and you are ready to power up again. This function is invaluable when working in bright areas where LED illumination alone is not sufficient. The audio feature may be disengaged when desired, such as for applications where the tool will be connected to circuits for long periods of time and the audio could become annoying. Proposition 65 entitles California consumers to warnings for products that contain chemicals known to California to cause cancer and birth defects or other reproductive harm if those products expose consumers to such chemicals above certain threshold levels. Autel battery tester MaxiBAS BT506 applies Adaptive Conductance to gauge a battery’s conductance health. Compared with ordinary load testers, this technology allows multiple tests without draining the battery and to test batteries that are low or nearly completely discharged. This Autel car battery tool BT506 similarly uses Adaptive Conductance to test the battery’s partnering components, the alternator and starter to see if they can take and store a charge.
You may also like…
Includes Bluetooth VCI, Clamp Cables, Four Battery Side Post Terminals (types S & T) and Thermal Paper Roll
Great Deal 
New Comment