Ronseal AMPWM25L Anti Mould Paint White Matt 2.5 Litre

Product Information

Advanced Glass Microsphere Technology] Dryzone Anti-condensation Paint has been designed to reduce condensation by increasing the time-to-condensation by up to 3 times, allowing moisture to dissipate. PREPARATION – Ready for use on interior surfaces where mould has appeared. Before painting, the surface should be dry, clean and free from grease, dirt, rust and loose or flaking material. Any mould growth should be wiped down with bleach or anti-mould spray and left to dry. INTERIOR USE - Ideal for use on internal walls and ceilings in bathrooms, kitchens, and bedrooms, or around doors, frames, skylights, cold water pipes and cooling ducts. Suitable for domestic or public areas.

Zinsser Perma White Mould Resisting Paint is ideal for homes, motels, hotels, hospitals, schools, restaurants. Zinsser PermaWhite Mould Resisting Paint is available in matt (and satin). It is available in white, or mixed to any colour to enhance the decor of any room. Hands-On Expertise & Collective Knowledge: Our team boasts extensive DIY experience and in-depth knowledge. in-1 action] Moisture Buffering - Open-pore structure making it resistant to moisture and highly breathable.Rempro thermal paint is anti-condensation paint designed to stop mould and dampness by resisting condensation and mould formation on internal wall and ceiling surfaces. As condensation takes much longer to form than other paints, mould won’t grow. If you are returning a worn garment that you feel may have developed a fault the cost of return will be the customers resposibilty and please remember the garment must be washed before sent, any garment returned unclean will be rejected. PREVENT & CONTROL – Polar anti-mould paint is specifically designed to prevent mould from penetrating interior walls and ceilings. P101 If medical advice is needed, have product container or label at hand.P102 Keep out of reach of children.P103 Read carefully and follow all instructions.

Zinsser Perma White Mould Resisting Paint (Matt Finish) is a water-based paint specifically designed to withstand the harsh conditions of moisture prone areas in your home. Its unique, safe ingredients prevent mildew and mould growth on the paint film even under the harshest conditions. You can apply it to walls, ceilings, window and door reveals, on top of wallpaper and existing paint finishes, however the base must be in good condition or you’ll just be wasting your time and money! Zinsser Perma White Mould Resisting Paint is formulated to resist mould and mildew for up to seven years Not only homeowners but also hotels, motels, nursing homes, schools, hospitals, health clubs and gyms find in Zinsser Perma White Mould Resisting Paint what they have sought for years: a finish for bathrooms and other high-humidity areas that stay mildew and mould free, good-looking, bright and colourfast for years. Coverage approximately 10 square meters per litre. Coverage will vary according to surface profile and porosity. When incorporated into a paint film, glass microspheres act as miniature Thermos-like bottles, providing a thermal barrier between cold surfaces and the warmer ambient temperature within a living space. As the air is insulated against the colder wall surface, condensation and mould growth are drastically reduced.Rempro thermal paint is a water-based internal emulsion which will drastically reduce condensation formation by utilising Glass Microsphere technology. When incorporated into a paint film, glass spheres act as miniature thermos-like bottles, providing a thermal barrier between cold surfaces and the warmer ambient temperature within a living space. Condensation is controlled as the air is insulated against the colder wall surface. This, in turn, inhibits mould and fungal growth.

EASY APPLICATION – Apply Polar Anti-Mould paint to a clean and dry surface, using a brush, roller or airless spray. Drying time is between 2-3 hours, a second coat can be applied after 4 hours. The spreading rate is up to 11 sq. metres per litre. Our thermal paint is a water-based internal emulsion which will significantly reduce condensation and mould by utilising Glass Microsphere Technology. Unlike other anti-condensation paints, Rempro paint does not contain any harmful biocides. These glass bubbles (or spheres as they are also known) create a thermal barrier between the air in the room and cold wall surface once the paint has dried. PermaWhite® Interior Matt - Recommended for application in high-humidity areas where a durable, low sheen finish is desired such as finished basements and kitchens.Independent: We will tell you exactly what we think of a product and we would never recommend anything we wouldn't use ourselves. Self-priming - adheres to glossy surfaces without sanding. Porous surfaces, such as bare plaster, must first be primed to satisfy their porosity (i.e. with Zinsser Bulls Eye 123). PermaWhite® Interior Satin - A scrubbable, satin finish recommended for high-humidity areas that are subject to challenging wear and tear. Ideal for bathrooms and laundry rooms.