Joined in 2023 
82 
63 About this deal
I’ve been plagued with water spots after washing my car in the hot weather so I decided to try a water filter. Initially, I was going to buy an Aquagleam but then I saw the Raceglaze version which is refillable. I tried it for the first time today and to say I’m impressed is an understatement! I didn’t believe it could dry without any spots or streaks, but it does. Even more impressive is the finish it leaves. Compared to the filtered water, normal tap water seems to leave a film over the paint which obscures/dulls the shine. Once dry, the filtered water leaves the paint with a sort of smoothness which is difficult to describe. It feels almost like it’s just been clayed. I washed the paintwork and left it to bake in the sun (for test purposes) whilst I cleaned the wheels. I had to dry the last few drops off with a towel because I wanted to apply some Jett, but even before towel drying there were no spots or streaks to be seen. The Jett normally adds a slight amount of depth to the shine but after rinsing with the filtered water it looks totally different. It’s far more glossy and the reflections are much sharper. I was going to take some pictures but there was a cloudburst before I could finish with the Jett If anyone is thinking of getting one of these but is hesitating because of the price, find the money from somewhere and just get it! You will not be disappointed. The only thing to watch out for is how slippery the filter can be when you have wet hands. After using it I disconnected it from the mains pipe, stood up, and then disconnected the other end… only to pull to hard and yank the unit out of my wet hands. As you can imagine it dropped on the tarmac connector first and has destroyed the end. A hose connecter will still fit, but it’s not water tight. I’ll have to force a bit of hose over it and secure with a jubilee clip it I guess. You have been warned!
There’s no need to dry after if you don’t want to. This is because the filter will remove all the minerals or impurities leaving just water on the vehicle! (always rinse 100% of the car shampoo off for best results). The Di pressure vessel has a capacity of 11 litre, and used in conjunction with included Di resin can produce top quality water which is suitable for any pure water application, including pole window cleaning, aquatics, drinking water, car valeting, gardening and hydroponics as well as fish keeping. Mains water comes into the unit and is distributed from the bottom head and up under pressure into the resin bed, and as its only outlet is into the pipe, comes through the resin bed to emerge on the outlet side as close to 0 parts per million (ppm) of dissolved solids as possible. Using a hosepipe to wash a car uses approx. 30 litres of water (AutoExpress 21/3/2012), a final rinse only a fraction of that – we estimate 5-7 litres at most.This is a breakthrough in filtered water product for car washing that is proving to be very popular.We recommend that a final rinse is performed at half mains pressure, just sufficient to create a wave of water over the vehicle, and should be able to be completed in around 45 seconds for a standard family car, little over a minute for a 4×4. This is based on our own usage over the last 11 years. Are you tired of washing your car only to have it dotted with water spots which can only be removed through polishing? At EV Accessories we have the perfect solution that leaves a shiny, spot-free finish to your car every time with little effort. Our Pure Water Di Pressure Vessel water filter is the answer. Part of a perfect car cleaning solution, the Di Vessel filtration system removes dissolved particulates from the water leaving the water free from contaminates, meaning you can leave your car to dry naturallyTo connect the water outlet to the system inlet, standard 3/4-inch threading is provided on the hose adapter. This adapter helps in connecting the 8-inch long hose to allow water to flow towards the system. The filter raisin is capable of absorbing mineral salts, sand, and any type of dirt. Race Glaze’s solution – thanks in no small part to the resin – reduces this down to nil. Or, to just about an imperceptible amount. So much so, that many professional and high-end car detailers use similar types of filtration systems that create distilled and purified water. In other words, you can use its car wash water filter, and even allow it to air dry or evaporate naturally, without leaving marks. Is It Really That Good? The resin will exchange the magnesium and calcium ions found in hard water for sodium ions, which are harmless to your vehicle’s paintwork.
The No Spots Pro deionizer includes an electronic TDS meter that measures the TDS level of input water. The CWS-300 is a versatile machine suited for personal use. The 20-inch canister captures dissolved solids. As it captures these solids, it releases hydrogen and oxygen into the water. The filter fits pressure washers to add to that it is smoother flowing water and a better filtration experience. Also, the filter left no stains and it is compact. Finally, the aqua crest hose pipe water filter for car wash. Deionized water has no minerals that cause visible water spots, and when using it, you get a spot-free wash. There is no mineral residue, and it eliminates odors. Diluted chemical dries your car faster and cleaner, which will save time.The Aquaticlife Hose Pipe Water Filter For Car Wash's superior materials makes sure that it ages well with use. The aquaticlife hose pipe waterfilter forcar wash is suitable for use on any vehicle. The Manufacturer says: Product development is guided by comments and suggestions from retailers and consumers who use our products. Also, it is built to last, is easy to assemble and it does the job. Lastly, the ontel hosepipe waterfilter forcar wash is the professional quality carwash system with revolutionary foam blasting technology just spray and rinse. If you want pure-filtered water to give your vehicle a final dry-free rinse then this is the kit to use. The Raceglaze 7 litre water filter is much cheaper per litre of water than Aquagleam units you can buy (which have leaked filter resin with the water when I used to use them before discovering Raceglaze water filters). Besides the many advantages of using deionized water for washing your car, deionized water will also help avoid the build-up of salts. The Unger Rinse ‘n’ Go unit is lightweight and more compact than most other deionizers, so you can easily transport it.
Their lifespan is in the neighbourhood of 450 to 700-litres, depending on how poor the water quality in your local mains might be. But if you’re sparing with its usage, as how we detailed it earlier, and use it as a finishing touch, then it could last for quite a while. Being efficient about water usage will prolong the number of individual washes, and keep the costs down until the filters need changing. Final Thoughts After several days or months, this can cause a serious amount of damage to your vehicle’s paint job and ruin its appearance. The Spot Free Water De-Ionizer Kit includes everything you need for a one-step, in-line filtration system. Unfiltered water from an outdoor spigot can contain a number of things you wouldn't knowingly put on your vehicle. Yet, without any type of filtration system, you are washing your vehicle in unclean water.The filter may be laid on the ground however it is best suspended vertically with water in at the bottom Inside the car, the deionized water is useful for cleaning electronics and tends to clean upholstery better as it is not likely to leave water stains or marks. We’ve all had to swiftly run round our cars to dry them before water spots form, which are very hard to remove and can badly affect paintwork. And try as you might, washing and drying will cause swirl marks and light surface scratching. The media we use is Purolite MB400. Purolite is a market leader in filter media technology and this is the highest quality product available for this application. Even when the colour has changed, continue to use the filter until you are no longer satisfied with the result
The AquaHouse DI Car Wash water filter leaves your car with no water marks or streaks when used to rinse after cleaning. Using a high quality filtration resin the AquaHouse DI filter removes hardness minerals and particles from the water which would otherwise leave watermarks after drying. Does exactly what it says it will do, works flawlessly have recommended people buy them I live in a really rubbish hard water area where river water is used so that leaves water spots all over the car, with the Race Glaze… nothing not a trace. While we do recommend this system, be aware that it may not produce the most consistent results and may need the resin filters replaced fairly often. Unger claims that it supports up to 11 car washes. It is important to keep these rinsed areas wet as you complete the whole vehicle, not allowing the vehicle to dry before rinsing a second time using purified water from the in-line filter. Now it’s time for the Aqua Gleam! This stage is critical as it reduces chlorine, which can damage ion exchange resin. Stage 2: Ion Exchange Filtration
Our Car Wash Water Filter DI Pressure Vessel Features:
The Adam Polish Water Deionizer System is one of the power fill options on the list. It uses a higher grade of filter resin that absorbs mineral and chemical molecules from regular water. It can filter about 1,120 gallons of water before refilling the resin again. The system can handle 100 ppm of TDS easily and produces water with 0 dissolved solids. A TDS meter is provided to monitor the dissolved solid level in the supplied water.
Great Deal 
New Comment