JENOLITE Industrial Strength Paint Stripper/Paint Remover Aerosol | Use on Wood, Metal, Brick, Concrete | Paints, Varnishes, Lacquers, Adhesives | 400ml

Product Information

The biodegradable paint remover can be applied by brush, roller, or sprayer. It’s successful at stripping new and decades-old paint coats from stone, metal, and other painted surfaces, all with ease. The quality of Nitromors All Purpose Paint and Varnish Remover is manifest in its ability to act swiftly, stripping up to twice the paint layers.

In addition to application tips for the different types listed above, users will want to follow these practices for safe and effective use of any paint stripper: The methylene chloride-free and non-drip formulation enhances the quality of the product by providing safety and ease of use, especially on vertical surfaces.If there are multiple layers of paint, you may need to repeat the application to remove all layers. Low-VOC water-soluble Max Strip Paint & Varnish stripper contains no methylene chloride or NMP. The no-drip gel formula sprays, brushes, or rolls on easily with less mess than regular liquid chemical paint stripper. It removes most types of paint and varnish from most porous and nonporous surfaces.

Lead paint is one of the most important things to be careful of. Lead paint is harmful and can release toxic fumes when removed. So, special care should be taken when selecting a lead paint remover and during the whole paint removal process. While many of the gel and paste paint strippers can be used indoors, doing the paint removal process outdoors, if possible, is still preferable. If it is done indoors, make sure that all the windows and doors are open and the area is well ventilated. While tradesmen across the UK use this often, don’t let that put you off. You don’t need to be a professional to use this paint stripper – just follow the instruction manual and you’ll be sure to do a good job. Solvent-based paint strippers deploy toxic chemicals to break the bond between the paint and the surface, causing the coating to bubble up. Solvent-based: This type of paint stripper works by weakening the bond between the surface and the paint. Solvent-based strippers work effectively on paint, epoxies and varnishes, removing them from surfaces such as wood, metal and masonry. These strippers tend to have harsh chemical smells and are generally more expensive. Common solvents used in paint strippers are benzyl alcohol and n-butyl acetate. Water-based strippers fall within the category of solvent-based, as water acts in the solvent in this case; these strippers may also contain small amounts of chemicals, but not nearly as much as traditional solvent strippers.

Industrial Strength Paint Stripper

Our window casing and basement floor had previously been painted. We spray-painted the roofing material and let it cure for a week prior to stripping. Following the directions on the label of each product, we applied the strippers, let the product work for the minimum recommended amount of time, then tested with a scraper at intervals until the paint was ready to remove. Then we used a paint scraper, paint-stripper pads, and stiff bristle brushes to remove the paint as if we were preparing the surface for a fresh paint job. If any of the products required additional time or another application to complete the job, we did so. FAQs It washes and rinses clean with water and leaves no residue. It does not contain acid or sodium hydroxide so the neutralization process is eliminated. This product will not darken or penetrate into wood grain making it effective on all woods and metals. It is also safe on glass surfaces and will not etch or damage the glass.

Use a paint scraper or a drywall knife whose edge has been slightly dulled with a metal file to lift off the loosened paint (and any laminate paper squares) in a continuous motion and in a single direction (in the direction of the grain if stripping wood). Sweep the paint waste into a resealable plastic bag with the scraper.Polycell Maximum Strength paint stripper is an average-quality product ideal for hobbyists and DIYers. It comes at a great price and it’s suitable to use on wood and metal to remove either solvent or water-based products. The dichloromethane-free formulation is less volatile, allowing the product to stay active for longer, enhancing the overall effectiveness of the product.

Independent: We will tell you exactly what we think of a product and we would never recommend anything we wouldn't use ourselves. Covering the treated area with plastic is recommended to retain moisture. Factors to Consider When Choosing the Best Paint Remover for Wood

Shoppers who are stripping old paint in homes built pre-1978 will want to first test with a lead paint test kit. If the test is positive, it’s important to choose a paint stripper labeled for use on lead paint (these strippers may fall into any of the four categories of paint strippers above and usually come in a paste or gel form to trap lead particles and keep them from going airborne). Application Something that makes RMR-86 special is that it was developed by highly experienced disaster restoration professionals who were tired of traditional mold removal techniques that involved the use of wire brushes and lots of scrubbing. Things to Be Aware Of