BOZONLI M18 Lengthen Hex Bolt - Fully Threaded Setscrew Stainless Steel Mechanical Bolts M18×30mm,1 pcs

Product Information

For full table with more Property Classes - rotate the screen! Metric Bolts - Coarse Threads - Proof Loads Thread As noted, the specification of metric bolts includes the definition of thread pitch, but if this is omitted then a coarse pitch is assumed. Metric fasteners are available with either coarse or fine thread pitches with some metric bolt sizes offering extra fine thread pitch options. It is worth noting that metric bolts with a coarse thread pitch have more threads per inch (they are more closely spaced) than comparable imperial bolts. List of common metric bolt sizes. Metric Coarse

BS3643 defines the limits and tolerances for ISO screw thread gauges. The standard is divided into two parts. Part 1 is based on ISO 965/1 and ISO 965/3 providing the principles and basic data for specifications of ISO metric screw threads.The resulting hole diameter d 0 for each type of hole (normal, oversize, short slotted, long slotted) is determined by adding the nominal clearance given in EN 1090-2 Table 11 to the nominal diameter d of the bolt.

where e 1 is the distance between the center of the end bolt and the end of the plate measured parallel to the load direction, p 1 is the distance between the centers of neighboring bolts measured parallel to the load direction, and d 0 is the diameter of the bolt hole. Proof load is defined as the maximum tensile force that can be applied to a bolt that will not result in plastic deformation. A material must remain in its elastic region when loaded up to its proof load typically between 85-95% of the yield strength. Acceptable clamp load is typically 75% of proof load. Ultimate Tensile and Proof loads for metric bolts according ISO 898-1 "Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread". For full table with more Property Classes - rotate the screen! Metric Bolts - Fine Threads - Minimum Ultimate Tensile Loads Thread According to EN1993-1-8 Table 3.4 the shear strength of the bolt may be based on the tensile stress area.A set screw fastens materials together by twisting it directly through the last component, into a pre-threaded hole, pulling everything together. A shoulder bolt fastens materials by passing them through pre drilled holes in the adjoining materials and cramping them between the head at one end and a nut on the other. Additional washers are often used to spread the load further. A set screw is fully threaded from underneath the head and a bolt is partially threaded (has a part-plain shank). A bolt is used when you know the length you need and a set screw can be used as a bolt if you need more flexibility in the length.