Cuprinol Garden Shades Somerset Green 2.5L (Tinted to Order) & PSP Brush

Product Information

Coverage quoted with two coats, however a third may be necessary to achieve a uniform colour and to give added protection to horizontal surfaces. The 103 third parties who use cookies on this service do so for their purposes of displaying and measuring personalized ads, generating audience insights, and developing and improving products. For spray application, use of either the Cuprinol Fence Spray or Cuprinol Power Sprayer are recommended. Cuprinol Garden Shades colours have been specially developed to protect wooden garden structures and furniture. If using more than one can it is advisable to mix them together in a container or finish in a corner before starting a new can.

As Garden Shades often goes on directly to the wood, without a primer, sometimes it will soak deep into the wood and this can create the need for a third coat. If you can see any area's that might want an extra coat, get that done before starting another whole phase.It is free-flowing to enable a smooth finish that gets into all the gaps and allows the profile of the wood to be a maintained. Colours are easy to choose by combining nature’s neutrals (greys, and muted greens, browns and blues) which are best suited for bigger items in the garden and nature’s brights (yellows, pinks, purples and brigther greens and blues) ideal for smaller items in the garden. Be mindful that it is waxed-enriched and that once these waxes are dried, they act to repel liquids, which would include an additional coats. Apply in dry conditions, above 5 degrees Celsius and when bad weather is not forecast, minimum of 2 coats required. Garden Shades is a water based product, so an application of water and detergent should provisionally be used.

only time will tell if it is can handle the weather where I live as we are prone to frequent rain and hail showers in winter, so far its shedding the rain well and looks good! Recoatable in 8 hours with coverage up to 12sq/m per litre on smooth timber and 5sq/m per litre on rough sawn timber. It can also be applied on terracotta, brick and stone, bringing out beautiful rich colour into the garden. Before moving onto the next phase, go back over what you have just done with the next coat before moving on to the next phase.As its sprayable, it also needs to be of low viscosity and will be runnier than other traditional paints. Please make sure you trial this water based paint onto a small section of the actual surface to be painted before decorating as the substrate and texture of the surface can affect the final colour. Special pigments ensure a rich colour and allow the natural texture of the woodgrain to shine through.

An opaque wood finish that has been specially developed to colour and protect sheds, fences and other garden wood.If this has been done without success you could cover the area in sodium bicarbonate and leave for 20 mins and then scrub with a brush and warm water. Cuprinol colours have pigments in the paint which ensure a rich colour and let the natural texture of the wood grain shine through. covers up to: Smooth planed wood Brush: 10-12m² Spray: 4-5m² Rough sawn wood Brush: 3-5m² Spray: 2-3m² Coverage can vary depending on application method and the condition and type of surface. Cuprinol operate and manufacture with the understanding that your garden should be treated as an extension for your home and is crucial to your wellbeing. The product will still achieve good opacity in 2 coats over a similar colour, although deeper colours may require a third coat.