Nerf Elite 2.0 Motoblitz CS-10 Blaster, Motorised 10-Dart Blasting, Airblitz 6 Darts At Once, Clip, 22 Elite Darts, Multicolor, One Size

Product Information

Hopefully, I can get to some of these latter ideas. Given the interest in this blaster, though, someone may beat me to it. Last Thoughts It’s been a while since Hasbro made a blaster that had multiple functions, decent performance, and a nice price point. For those who tinker, it even offers a ton of modding potential (that part, while nice, is out of the scope of the review score). I speak of the Motoblitz, a bullpup-style blaster featuring a front-mounted, air-powered shotgun. It hits the Elite standard, has a neat secondary function, feels great to use, and it possibly the best Nerf offering this year (barring some unforeseen release). Now to convert the Motoblitz to accept short darts. This part is entirely optional but also incredibly simple. The short dart pusher rotates and snaps onto the existing pusher. Then add a bit of hot glue near the joining part to secure it more permanently. File down the front corner of your short dart adapter at a 45-degree angle, so it doesn’t collide with your shell, and test both the adapter and magazine for fit. TO AVOID EYE INJURY: WARNING: Do not aim at eyes or face. Use of eyewear recommended for players and people within range. Use only official Nerf darts. Other darts may not meet safety standards. Do not modify darts or blaster.

INTEGRATED SCOPE: The Motoblitz blaster has an integrated scope to help with targeting. Blaster requires 4x 1.5v AA alkaline batteries (not included) Now we’re starting to assemble our mod parts. Set your switch with high temp hot glue or epoxy putty, once again making sure that the midpoint of the switch lines up with the midpoint of the shell. After the glue cools, press-fit your trigger extension into the existing rev trigger and test for smooth travel. Set aside the assembled rev trigger to install later.Solder the positive and negative wires according to the diagram on the cage and route the wires through the wire traps on the cage and the shell. The negative wire will go from there to the XT-60 connector. Take the positive lead down the grip and solder to the second (normally open) terminal of the rev switch. Using the rest of the positive wire, solder to the third (common) terminal on the switch. If you want to use heat shrink on your terminals, you can. But I don't see the purpose as long as your soldering is reasonably clean here. Also, it should be possible to model a barrel end of the shotgun to fire either three Mega darts or two Mega XL darts. When that happens, though, is another matter. On the other side of the left shell is the battery tray, and nearly all of it needs to go to fit a LiPo. First things first, rip all the terminals out with pliers. Be careful not to stress the plastic too much. The rest of the plastic webbing and the front wall can be trimmed away with a combination of flush cutters, end-nippers, and a hobby knife. The result should be a smooth compartment that won’t rub against your battery and a convenient hole in the front to feed your XT-60 connector through.

The scope is not easy to look through, as it is too low for the user to look through while shouldering the blaster comfortably. Coop772 (2022-06-25). [REVIEW] Nerf Elite 2.0 Motoblitz | MASTERKEY SHOTGUN INTEGRATION! (Video). YouTube. Retrieved on 2022-06-27. On the left side of the shell, four posts also need to be trimmed flush to the shell: Two in the grip and two in the flywheel area. Whenever you're cutting posts, pegs, or fins off of shells like this, you want to be careful you don't go too far. In the case of the top flywheel post, there’s an embossed detail on the other side that we don't want to cut. They don't have to be perfectly flush but keep it as clean as possible. Alpha Trooper CS-18 • Deploy CS-6 • Longshot CS-6 • LongStrike CS-6 • Raider Rapid Fire CS-35 • Rayven CS-18 • Recon CS-6 • Stampede ECSWARNING: Do not aim at eyes or face. Use of eyewear recommended for players and people within range. Use only official Nerf darts. Other darts may not meet safety standards. Do not modify darts or blaster. This change of mind return policy is in addition to, and does not affect your rights under the Australian Consumer Law including any rights you may have in respect of faulty items. To return faulty items see our Returning Faulty Items policy.