About this deal
Press the [INPUT] button, when the list of input Source appears, press the [ / / < / >] buttons to select the source HDMI / AV, then press the [OK] button to connect. If your TV does not automatically detect an Ethernet connection, then use a wireless network, select your network from the list that displays, also you can add a hidden network. eARC/ARC enables the TV to directly output the digital sound through an HDMI cable. Please note that it works only when the TV is connected to the audio receiver that supports the eARC/ARC (Audio Return Channel) function. The TV’s built-in Wireless LAN Adapter supports the IEEE 802.11 a/b/g/n/ac communication protocols. Enhanced viewing can automatically adjust the picture mode and sound mode so as to match with the current content displayed on this device in case it is recognized by the automatic content recognition service.
Hisense U7QF (55U7QFTUK) 4K ULED TV Review | AVForums Hisense U7QF (55U7QFTUK) 4K ULED TV Review | AVForums
Take out the 2 stands from the accessory bag and then insert the stands into the bottom slots of the TV. Make sure the tilt angle between the TV screen and the vertical surface is no more than 15 degrees.Costco Online UK Limited, UK Home Office, Hartspring Lane, Watford, Hertfordshire, WD25 8JS. Registered in England and Wales No. 8055444
Hisense A7GQ Review: Great performance out of the box - Tech Week Hisense A7GQ Review: Great performance out of the box - Tech Week
Connect a HDMI / AV cable from an external AV equipment. No sound connection is needed for HDMI to HDMI connection. If the signal resolution does not match the specification table, you need to change the setting of device according to the table. Please consult your device user manual for instruction. Press the button to turn the TV on. Press it again to bring up the control menu and move the focus between different inputs. Long press the button to make a selection.If you encountered difficulty when setting up your TV, we suggest you refer to the troubleshooting tips in the User Manual or the E-Manual. Press the [ / / < / > ] buttons to navigate the menu and change the settings. Press the [OK] button to confirm. The remote control angle: taking the remote sensor as an apex, 6 meters away, its controlled horizontal angle is within ±30°, while the vertical angle is within ±15°. Insert two AAA size batteries. Make sure to match the (+) and ( - ) ends of the batteries with the (+) and ( - ) ends indicated in the battery compartment. Pair the remote to the TV after you power it on. Keep the remote control within 3 metres from the TV. Press any button (except power and mic button) to pair.
Hisense U7QF QLED TV review | TechRadar Hisense U7QF QLED TV review | TechRadar
When this port is used as the eARC/ARC function, it can't be used as signal input at the same time. Remove depleted batteries immediately to prevent battery acid from leaking into the battery compartment. Battery chemicals can cause a rash. If the batteries leak, clean the battery compartment with a cloth. If chemicals touch your skin, wash immediately Attention: According to the size of the TV supporting surface, you can select one of the base stand installation patterns, as shown in the figure. Carefully place your TV facedown on a soft, flat surface to prevent damage to the TV or scratching to the screen.