Seagate ST1000DM010 1 TB 3.5 Inch Barracuda Serial Hard Drive

Product Information

Xeon x5680 with 24GB or RAM https://www.asus.com/Motherboards/P6T_WS_Professional/ (Windows server 2008 R2 Datacenter) the next lines is EXTRA nothing to do with the problem just to clarificate the problem a bit more as how I fix it temporally

Seagate ST1000DM010 1 TB 3.5 Inch Barracuda Serial Hard Drive

Someone ask me to test it with a diferent power Supply but that isn't the problem as I test it with 3 diferent powerSupply (of more enought power) and 2 USB HDD case and fail on all Ryzen 3 3900X with 32GB of RAM https://www.asus.com/Motherboards/PRIME-X570-PRO/ (Linux Debian 10 & Linux Mint 20) to temporaly fix the problem, I put the HDD in a USB case than lie about too many things (the name of the HDD) EasyPC now delivers Nationwide! Express Delivery (4-hour delivery service) is available within Metro ManilaMain Server: Dell R510, 2x 6 Core L5640s, Samsung DDR3 64GB ECC Reg, Chelsio T320 HP Dell Quad NIC 4gbp LAG, VLANs 12 Bay Hotswap. 2x Dell Perc H200i flashed to IT Mode NOTE: I used the core2quad instead of the Ryzen by now as it have more sata ports to can test more things at the same time core2quad with 8 GB of RAM https://www.msi.com/Motherboard/support/P965_Platinum (FreeNAS-11.3-U3.2 on 1 USB of 16GB)

BarraCuda 3.5 HDD | Support Seagate US BarraCuda 3.5 HDD | Support Seagate US

not sure how I can fix it, but now I can think on how to fix it and other people too., the USB case is just a temporal fix, I just use it to test NOTE: the "Hardware ECC recovered" value didn't appear to be right and sometimes that value reset itself and look more like the number of sector read/writes on the disk, I get 62.100 M of errors and today have a raw value of 0x06B9 I put a laptop near of the server and when I try to create the pool I get this error on the UI interface: and also isn't on the list of SMR drivers than are here https://www.ixsystems.com/community/resources/list-of-known-smr-drives.141/are one with the ECC but is with another size of 1.5TB Seagate disk, and is for the old version (ST31500541AS) and that model is twice as high as this one than is a new design I move the disk on the sATA port to the USB case and placed the disk on the USB case into the system (I know is "damaged" but not too much) and I get this messages trying to format it (wipe with zeros) and I reach any % and the wipeing Disk process stop as it will be finnish I see that... multiple times, but htat was just after clean the screen (pressing enter) and try with the laptop to create the Vdev/pool