Corsair Hydro H60 Liquid CPU Cooler - Black

Product Information

Then there’s the fact that the illustrations shows the use of eight washers to install the radiator and fan, when only four washers are included with the H60 and listed in the parts inventory. If there’s one thing Thermaltake understands, it’s how to design a case that can actually fit any cooler on the market. com/us/en/Categories/Products/Accessories-%7C-Parts/PC-Components/Cooling/LGA1700-Retrofit-Kit/p/CW-8960091) . You can see that the Hydro H60 nearly matches the bigger MasterLiquid 240, yet comes in much quieter.

Additionally, the fan is designed to be highly efficient, providing reliable cooling performance even under heavy loads. The H60 allows you to free yourself from the wall and stay powered wherever you go using the sun's energy.So I settled for this and cut a hole in the top of the case to mount the rad and fan and it works very well. This luxurious yacht is loaded with conveniences that make handling her effortless even when short handed. At Frank Nutt Sewing Machines we have an in house servicing and repairs team that are on hand to help.

So even though 190 RPM would normally be outside of normal testing variations, in this case it is acceptable. The cooler is equipped with a 120mm fan that spins at low speeds, ensuring that noise levels are kept to a minimum. I'm sure that some extreme water-cooling types go for this sort of setup, but I'd wager far more are using 120x240mm radiators, if simply for the fact that most cases won't easily accommodate a larger radiator.

To summarize our fan speed results, the new revision does not require higher RPMs, and is thus no louder than the original H60. Weighing in its favor is the fact that as a 120mm cooler, there’s simply less to handle: the radiator is half the size of 240mm models (and much lighter), there’s just one fan to install and connect, and it doesn’t take much effort finding a spot to place it in your case (any 120mm fan mount will do). However, in our experience, when a fan is running at very low RPMs, the fan speed is very inconsistent. So I had to remove the Coolit fixing frame (and the glue that attached it to the motherboard), as well as cleaning the old paste off the CPU. Closed-loop liquid CPU cooling solutions are gaining popularity as more and more vendors are carrying their own variation.