Joined in 2023 
82 
63 About this deal
The stain is truly clear, so it's not a good choice if you're trying to cover up any imperfections in the wood planks.
Transparent stains can maintain the original appearance of the wood grain to which it's applied. That makes it a good choice for a new, unstained surface that already looks great. If you're using brand new materials, then a clear or transparent stain might be the right choice. Tinted The manufacturer recommends 14 days for the stain to fully cure, meaning the stain has seeped into the wood to dry and fully achieve its color. PREPARATION: Ensure that the surface is clean, dry and free from dirt and dust and any previous finish. If sanding, the wood should be sanded with the grain, using 150 – 220 grit abrasive paper. Village Green Wood Stain is formulated using high concentrations of the best quality pigments and binders available, leading to dazzling, colouful finishes that are easy to apply.
Similar products
Although it's an all-in-one stain and sealer, the manufacturer recommends two coats for optimal weatherproofing capability. Unlike paint, stain allows you to see the natural grain and texture of the wood. How much or little coverage the stain provides is referred to as its opacity. Clear stain has no color, making it a good choice if you want to reveal the wood in its full, natural beauty while also protecting it.
Like most wood stains it can easily be applied by brush and also by roller, sprayer or paint pad. For best results apply at least two coats, the first will act as a primer and may soak into the timber unevenly depending on the porosity and any previous coatings present, the second coat evens everything up to a lush deep green. FINISH: Allow 24-48 hours for the stain to fully dry before applying a finish. You can finish your stained wood using a wax, oil, varnish or lacquer.You'll also need to think about the type of wood. Softer, inexpensive woods are often best treated with solid or semi-solid stains, for purely practical reasons. And even when you start to narrow down the list of potential candidates, you'll want to make sure you try out your best options before dedicating yourself to one. Choose a Complementary Color
It's simple to apply, and because it's made from an acrylic base rather than oil, all you need is soap and water to clean up. You can even apply it in lower temperatures—the temp just needs to stay about 35°F for 12 hours after application.If using our wood stain on exterior vertical timber surfaces, we would recommend using Osmo's UV Protection Oil Clear as a top coat for increased longevity***
Great Deal 
New Comment