Silverline Pipe Bender Guide 15mm (MS124/15)

Product Information

Some hardware processing plants use pipe benders for various pipe fittings, but each pipe bender has its own limitations, and its bending capacity is limited by its own parameters.

If the fitting requires a specific degree of ellipticity, the forming limit should be controlled to produce the desired distortion.There are many types of mandrels, including cylindrical mandrels, universal single head, double head, triple head, and four-ball head mandrels, as well as orientation single and multi-ball head mandrels. Each file can store 16 bending angles, and 16 sets of files can be stored in memory. The slow-speed positioning function and stable bending angle ensure a repetition accuracy of ±0.1°. If the pipe becomes wrinkled during bending, move the adjusting screw of the pressing die sleeve forward about 1/4 turn and then try bending again until there are no wrinkles. The bending process is performed using a bending die, clamping die, and pressure die. The bending die is mounted on the spindle, while the clamping die secures the pipe fittings to prevent any axial movement. The pressure die consists of a guide die and a follow-up die. During the bending process, the guide die applies the appropriate pressure on the anti-wrinkle die to the pipe fittings, and the follow-up die moves along with the pipe fittings. A mandrel is also used to fill the inner cavity of the workpiece and prevent any wrinkles, flattening, thinning or other failures during bending. First, the pipe diameter range of the elbow must be determined according to the actual production situation.

The configuration of the hydraulic pipe bender plays an important role in determining the price. There is a saying that the price is equal to the goods. Each price has its own reasons and requirements.The mandrel cylinder seat should be installed on the guide rail of the mandrel cylinder, and the guide rail of the mandrel cylinder should be equipped with a scale. Pipe benders are also considered as an important equipment in the tubing machinery industry. They offer multiple functions, have a well-designed structure, and are easy to operate. The pipe bender has several advantages, including multiple functions, a reasonable structure, and simple operation. Types of Pipe Benders

Adjust the rotation part of the traverse screw rod based on the selected pipe and mold to make its sleeve center line coincide with the center of the mold elbow. However, when using “one die for multiple pipes,” pipes with the same diameter should use the same bending radius, and the same modules should be used for bending pipes with different shapes. This helps to reduce the number of modules needed. Bend Pipe Mandrel and Its Position The entire machine tool can be lifted by threading steel wire through the bottom of the machine tool.A. Secure and release the clamping seat, then set the control panel to manual mode. Press the clamp button to the end of the clamping path. (At this point, there should be a gap between the wheel clamping die, which can be adjusted using the clamping seat adjustment screw).