Everbuild Black Jack 901 | Solvent Based, Full Bodied Black Bitumen Paint - Protective Coating for Concrete Structures, Stone & Concrete Screeds - 5 Litre - Black

Product Information

Protect skin and eyes and apply in well ventilated areas outdoors, do not inhale. Do not apply near open flames, sparks, heat or hot surfaces. sources. Dispose of any waste responsibly as it is toxic to wildlife. Do not swallow. Would bitumen paint be suitable for protecting the underside of a steel trailer? Ensure surface is in suitable condition for painting and free from grease, wax or penetrating substances. If previously painted, remove loose or flaking paint. Bitumen paint is usually long lasting. If applied to a porous surface like masonry it will last longer than when applied to less porous surfaces, especially those subjected to long hours of extremely hot sun. Exterior wooden surfaces in particular can retain moisture for up to 48 hours after rainfall or preparation. Ensure the items are thoroughly dry prior to painting. Preparing the surface is of vital importance to enhance the adhesion and life of the coating. All surfaces must be thoroughly dry and clean as well as sound and stable. Metal surfaces should be wire brushed to remove rust and for long-term protection, a rust-inhibitive product such as zinc phosphate or red lead should be used. Blistered or loose paint as well as tar-based paint systems should be eliminated. New galvanised surfaces should be treated with a proprietary etch primer or roughened with a wire brush.

Bostik Waterproofing Bituminous Paint Black Silk 5Ltr

Best results are obtained in warm (minimum 10°C), dry conditions and we recommend application of 2 coats. Use Conventional or HVLP spray, brush or roller. Our bitumen paint products Protecting coating on concrete etc: Due to the porous nature of concrete and some stone surfaces, an initial primer coat of Everbuild primer should be applied. Always ensure you have enough paint for your whole project. When more than 1 tin of the same colour is needed, it is good practice to ensure batch numbers are identical or to intermix batches prior to commencing painting.Avoid painting in direct sunlight, only when the air and surface temperatures are between 10 oC and 32 oC and humidity is less than 85%. Do not apply if, in the following 48 hours, there is likelihood of rain, frost, fog, condensation or if the temperature is likely to drop lower than 10 oC. This means that certain times of the year are unsuitable for painting outside projects - as a general rule of thumb Summer is recommended. Ready to use, this Everbuild paint should not be thinned and can be applied by spray or brush. A minimum of two layers should be added to the surface. The first coating should be left to dry before applying the second which typically takes two to four hours depending on weather conditions.

Everbuild Black Jack 905 All Weather Roof Coating, Black, 5

Apply with a good quality brush or roller. Also suitable for spraying - thin with up to 15% tap water and apply additional coat(s). Metal protection - corrugated iron sheets, fire escapes, stairways, ladders, storage tanks, gutters, down pipes, fences, railings, gates etc.Also suitable for interior wood, concrete and most laminate floors with correct application – please note that maintenance may be required in these situations. Felt adhesive such as Carbobond, is a solvent based mixture of bitumen, fillers and fibres, formulated for bonding felt (as the name suggests), so it is better to apply this first then the roofing felt which will (of course) adhere to it. Bitumen paint can then be applied on top of the roofing felt for extra protection and/or aesthetics. Will bitumen paint cure a leaking concrete roof?

Everbuild Black Jack All Weather Roof Coat 5L | Toolstation

Reseal tin after use. Clean up any spills immediately with water. Wash brushes in warm, soapy water. Chalk and mineral paint formulated for wooden furniture. Also suitable for laminate, powder coated radiators, UPVC, ceramic wall tiles (we recommend avoiding very wet areas like shower/bath surrounds). Here is some useful information about painting tiles. Can be used for internal walls – in this case, thinning with up to 10% tap water is advised to ease application.Porous, or ‘thirsty’ surfaces like bare wood or MDF, tend to absorb paint meaning additional coats are likely to be required to achieve a durable finish. In this case, your 750ml tin will provide less than 6m 2 of full coverage. If you apply the paint too thinly, durability may be affected. Usually cheaper than many other coatings offering similar weather proofing performance, it’s an economical option It’s frequently used on metal guttering, fire escapes, stairways, ladders, railings and fences. In the marine sector, bitumen paints are commonly used on boat hulls.

Questions about bitumen paints - Answered Palatine Paints

Prepare the surface well by removing dust, oil, grease, old coatings and surface contaminants. A primer is not usually needed with bitumen paint but occasionally for additional protection of bare metal surfaces, prime with Zinc Rich Primer or Metal Primer. Use fast dry etching primer for non-ferrous metals. Curing (hardening) time is up to 3 weeks in normal conditions. Treat gently until curing is complete. For ferrous metal, treat rust, remove any loose or flaking coatings and sand smooth - in these circumstances, we recommend 2 coats of Frenchic Finishing Coat as a base for the paint. We have also been asked what products can be painted over a previously bitumen painted concrete roof. Generally, it is fine to paint a bitumen paint over another bitumen product; if the reason for painting is to change the colour, then consider a bituminous barn paint like Carbolustre or Green bitumen paint.

While it’s generally reasonably heat and UV stable, its lifespan may be reduced in extremely hot and sunny countries.