Ubiquiti USW-PRO-48-POE UniFi Gen2 48 Port PoE Gigabit Network Switch

Product Information

Note: Although the cabling can be located outdoors, the UniFi Switch itself should be housed inside a protective enclosure.

When the reboot is completed the led will turn pale blue. You can now adopt the switch in the controllerThe USW-48-PoE is a configurable Gigabit Layer 2 switch with 48 Gigabit Ethernet ports including 32 auto-sensing 802.3at PoE+ ports, and 4 SFP ports. It provides Gigabit PoE links to your RJ45 Ethernet devices and Gigabit fiber uplink options to your enterprise network. The USW-48-PoE features a 1.3" touch LCM to provide status Four (4) SFP+ ports enable high-capacity uplinks of up to 10 Gbps, so you can directly connect to a high-performance storage server or deploy a long-distance uplink to another switch. 802.3bt PoE++ For information about compatible fiber SFP modules, visit: ubnt.link/UniFi_SFP_DAC_Compatibility Specifications The Ubiquiti UniFi USW-48-PoEis a configurable Gigabit Layer 2 switch with 48 Gigabit Ethernet ports including 32 auto-sensing 802.3at PoE+ ports, and 4 SFP ports. It provides Gigabit PoE links to your RJ45 Ethernet devices and Gigabit fiber uplink options to your enterprise network. The USW-48-PoE features a 1.3" touch LCM to provide status. PoE+ and eight PoE++ RJ45 ethernet ports have total 600W PoE budget, and four SFP+ ports offer 10Gbps uplink options. Other benefits include near-silent cooling and a 1.3" touch screen LCM display.

The Ubiquiti UniFi USW Pro 48 POE is a Gen2, configurable, Gigabit Layer 2 and Layer 3 switch with auto-sensing 802.3at PoE+ and 802.3bt PoE++. The USW-48-POE is set up using the UniFi Network Controller and has UniFi mobile app support allowing admins to configure and monitor virtually all of the switch features in a GUI from anywhere. We recommend that you protect your networks from harmful outdoor environments and destructive ESD events with industrial-grade, shielded Ethernet cable from Ubiquiti. For more details, visit: ui.com/toughcablePoE support simplifies your network infrastructure and cabling. Eight (8) ports offer 802.3bt PoE++ to provide up to 64W of power (per port) to your high-power PoE devices. The remaining ports offer 802.3af/at PoE. Redundant Power Option You can access any managed UniFi switch through the UniFi Controller to configure a variety of features: In the event of a UniFi switch power supply failure, the USP-RPS automatically supplies redundant power to the failed device. One UniFi SmartPower device can support up to 6 devices until the failed device is replaced. If you keep having problems with the installation of the firmware you can also try to install it your self directly on the device. To do this we are going to access the device using SSH. In addition to Layer 2 switching protocols and features, the USW-Pro-48-POE switch offers Layer 3 capabilities*, such as inter-VLAN routing, static routing, and DHCP server functionality. Near-Silent Cooling

To cache the firmware in your controller you open your controller and go to the settings (lower left gear icon). Search for Firmware and select Device Firmware Cache (or select Updates > Firmware in the settings menu) Managed and configured by the UniFi Network Controller with UniFi mobile app support, the USW-48-PoE offers an extensive suite of advanced Layer 2 switching protocols and features, including operation mode (switching, mirroring, or aggregate) per port. The UniFi Network Controller and mobile app allow admins to configure and monitor virtually all of the switch features in a graphical user interface from anywhere. Ubiquiti UniFi Gen2 Switches offer a variety of features, including 10G SFP+ ports, PoE+ or PoE++ support, and Layer 3* switching capabilities (*Layer 3 switching will be available in a future software release). Wait for the device to fully boot, the led will turn dark blue (or stay white if it wasn’t adopted before, approximately 5 minutes max)For outdoor applications, shielded Category 5 (or above) cabling should be used for all wired Ethernet connections and should be grounded through the AC ground of the power supply.