Euro Air Line Hose Compressor Fittings Connector Male Quick Release 5 PACK 1/4"

Product Information

The Standard and XF-Euro profiles do not interchange, for example, an XF-Euro adaptor will not fit into a UK style coupling. A standard adaptor will loosely fit into an XF-Euro Coupling, however this will result in a loss of air flow, so it important you have the correct profile. The collated flooring nailer in my previous post uses this type of banjo crimp at the body end of the whip hose

Our wide range of air line fittings are ideal for connecting components and air tools, and are compatible with Irish style couplings. Take advantage of the high quality car tools available at low prices from Euro Car Parts. Incidentally, PCL manufacture their own Euro-compatible fittings called "XF". These are Euro fitting and are incompatible with the original PCLs PLE? Most of the hoses I've looked at have either PCL ends or threaded ends, either NPT or BSPT. Most non European tools seem to come with a NPT female threaded body, so I make up my whip hoses by using an appropriate NPTM (male) x barbed air hose connector, a length of air hose, two crimp connectors (which technically require a special crimp tool but in reality can be pressed to fit using a bluntish pair of carpenters nippers) and a barbed air hose x Euro male end. This is a BSPT male x barbed hose connector and a hose crimp with the crimping tool and a hose cutter (sorry, no spare other ends or hose at the moment): Hose tails can be connected to couplings to enable fixing to airlines – tail sizes vary to fit different internal airline diameters. Hoses come in various sizes with dimensions stated as inside diameters (ID) and the banjos come in different sizes to fit them. BTW don't worry too much about NPT and BSPT - BSPT forms a non-air tight connection with NPT, you make it air tight by wrapping the male threads with a turn of PTFE tape before assembling.Another way to buy a hose is simply to buy one with BSP threaded ends (often 3/8in BSPM or 3/8in BSPF) and add your own adaptors, such as these (from top to bottom - BSPM x Euro female, BSPF x Euro female, BSPM x Euro male, BSPF x Euro male):

Many of the hoses in our range will come already fitted with some type of end fitting so you can start connecting up to your air compressor and tools, any addition couplers you need will be the same size. They are all 3/8in (I think), but 1/4in is another common size, especially on smaller tools with limited air consumption There are many other types of fittings but I just wanted to cover the most popular fittings we come across and at least with a few images you may be able to identify what fittings you require. Hope this was of some assistance.

BSP Lever Handle Ball Valves

Again, these can be tightened with a pair of nippers. I don't but Jubilee clips as they are quite bulky and can catch on stuff TECALEMIT is a specialist in dispensing technology; mainly for diesel, fuel, oil, lubricants and AdBlue® that is rugged, reliable, easy to use and cost effective; who are proud of their "Made in Germany" heritage. My existing tool ends that fit my cheap female to female spring hose. Plus the longer PLE fitting that came with my new hammer gun. PCL is part of the HORN GROUP of companies, joining the TECALEMIT brand offering products and services related to air, fluids and fuels. There are many different types of air fittings but most air tools use one of just a few types of connector. The main things to consider are the fitting type and the thread size. Common fixing types include ¼” BSP, ¼” PCL and 3/8” NPT.