ATOMSTACK A5 Pro Laser Engraver, 40W Laser Engraving Cutting Machine Laser Cutter with Eye Protection Fixed-Focus, 5W-5.5W Output Power, Compressed Spot, Engraving Area 410x400mm

Product Information

The dial would be 26mm or 28mm in diameter. There is very small text at the bottom. Would this laser capture all my tiny details?

Integrated stepper motor and shaft: The machine uses an integral screw rod instead of a combined coupling. The stepping motor and the screw rod are integrated, which makes the laser movement more precise and the coupling more durable. Emergency stop button: If there is an accident stop the machine at any time and the carving is safer. Fiber Laser Introducing the pioneering World's First 20W High Power 1064nm Pulsed Fiber Laser Engraver designed specifically for Frame Laser Engraving Machines. With remarkable precision, this technology effortlessly achieves a single-pass cut through 0.2mm aluminum and conducts multi-pass cuts on a 0.5mm brass sheet. There is a protective cover on the laser to protect the user's eyes and there is no need to wear additional protective glasses. At the same time prevent pets from scratching the laser spot

Import artwork in a variety of common vector graphic and image formats (including AI, PDF, SVG, DXF, PLT, PNG, JPG, GIF, BMP) Wide compatibility: The machine can be compatible with various mature engraving software, such as LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / XP / Win 10, and also support MACs system (LightBurn), engraving file format supports NC, BMP, JPG, PNG, DXF etc. A:One year warranty (We will send you the corresponding non-artificially damaged parts for free). Q:WHICH ENGRAVING SOFTWARE IS SUPPORTED? Upgraded high-performance fixed-focus laser: no need to adjust the focus before engraving;The focal spot area of the new laser is only 1/3 of the spot area of other ordinary lasers, new laser combine precision engraving and high energy cutting at the same time. The laser power of the fixed-focus laser is more stable than the zoom laser. New eye protection design: The laser protective cover perfectly protect your eyes,filter UV light for 95%. You and the people around can watch laser engraving without wearing goggles. Reduce the cost of your goggles and the inconvenience of wearing goggles.

The most importart part is again the interval scale. By scanning vertically and horizontally with different interval steps we can approximate the laser dot size. From the results we can see that the laser dot is a rectangular, approximately 0.1mm wide and 0.35mm high as with a bigger step, the lines are not touching any more. Power is vaired from 10% to 100% in 10% increments and the speeds are 600, 1200, 1800 and 2400mm/min. They are a bit difficult to read under that smoke stains :)Support offline engraving: Configure the terminal control panel to support offline engraving you can carry out engraving operations anytime and anywhere without being restricted by the computer. A:Wood, plastic (opaque), cloth, leather, and other materials that can be burned by laser. Q:CAN I ENGRAVE METAL AND STAINLESS STEEL? Photos are quite slow to engrave because the laser head must scan line by line like an inkjet printer. If you want to engrave a very large photo, prepare to wait a couple of hours :) With LaserGRBL you can import vector files (NC, BMP, JPG, PNG, DXF…) and bitmap image files (bmp, jpg, png and gif), The text engraving is done at 600 mm/s which is quite fast for such small movements, and therefore some shaking of the laser head is visible in the corners. This can be easily avoided by reducing the acceleration and speed in the settings.