About this deal
Over time it needs reapplying - either straight on top, or wash off previous layer with a damp cloth (water soluble). Hatte Probleme mit PETG das einfach nicht haften wollte - damit, kein Thema und es lässt sich rückstandsfrei wieder entfernen was bei Klebestift ziemlich mühselig war.
Our goal continues to be to make the most innovative filaments on the market, targeting difficult end-use applications where functionality is king. This clamping force helps prevent the warping effect, something feared by both amateur and professional users. These materials are handled by more experienced printers and are used mainly in the industry as an alternative production method with reduced waste.Whenever you finish a printing process, apply Magigoo again, both to ensure the correct adhesion of the piece and to protect the printing surface from damage when removing the piece. We are aware of the burden that the use of plastics places on our planet, and therefore we place great emphasis on ecology in terms of reducing waste and reusability. Bed temperature - magigoo needs some form of heated bed to activate the
It won't completely solve ABS/PETG warping issues, but it helps a lot - the bed adhesion can be so strong that the parts themselves break (layer separation) during printing rather than coming off the bed - and that's fixable with a soldering iron. Some mention that it's worth the money for the time invested in failed projects, while others say that it is a bit expensive and not good for expensive product.This is due to the fact that this material has been key for years in the manufacture of parts in many sectors and that there are many filaments with a nylon base ( PA12, PA66 or PA6) reinforced with carbon or glass fibers ( Nylon-Carbon Fiber CF15, XSTRAND GF30-PA6, etc). Magigoo PC ensures that prints stick firmly when the print base is hot and that the part is easy to remove once it cools. After the it has been applied it should be left to dry before 3D printing is started, it is also recommended that after each 3D print the plate is cleaned and applied with a new coat of Magigoo.