L-faster Plastic Box For Electric Bike Controller E-bike Controller Installation Box Mini Motor Controller Protection Case

Product Information

By the way, I possess a MIG welder, and I could build one in metal quite easily if I so wished, but wood appeals to me personally far more. Number Two: Decathlon Riverside 3 "womans" frame with GSM mid-motor, external KT 15+ A S06SC torque simulation sine wave controller - http://www. Most controllers and displays can't be mixed and matched, one has to generally pair them up from the same brand as often simple protocols in the programming aren't compatible. apart from that motor possibly spinning a bit faster because it's having 48V put through it instead of 36V, is this setup still fine to run? The cost of the bike is then deducted from your salary over a period of time, but as you don't pay tax or NI on the income that's deducted, you make a saving on what you would pay if you purchased outright.

It's also a way for you to save money on the cost of your cycle and spread the cost over a number of months, through your pay packet.

I still don't know what "36V/48V" refers to on those controller boxes, but I assume it must mean the battery. This controller box can give your e-bike controller good protection, dust-proof and waterproof, a great accessory for your electric bicycles. The only Comms is between controller and the display, the software/programming isn't universal between generic brands so one has to stick to the same pairing from the same maker. I want to get 60 miles from a battery so I just multiplied whatever that old battery was by 6 to come up with needing about 1,250 Wh or rather, a battery thats 48V/24Ah (1,152 Wh). In low power mode PAS 1 or 13% of available current I get 25 miles from a 6ah 36v battery, using the cells discharge current the actual available capacity is nearer 5.

Furthermore, if some battery types get warm/hot (not good for any battery type as the answer above suggests), then possibly a small, cheap thermometer might be considered to be installed. Nearly all are compatible with any 9 pin hub motor as the 9 pin wire sequence from the hub motor is generic and most use the Julet 9 pin waterproof connector, the one example not compatible is the flawed Suntour hub on Carrera bikes. NOTE—Please check as much as possible to the item picture, model and size carefully before purchasing. Instead of gluing the heatsink to the controller I might just screw it on in place of the original cover. The dual volt 36/48v controller looks very much like the excellent KT (Kuenteng) one, it will operate on 36 or 48v without issue including using both alternately.A 24ah battery using 3000mah cells would have 8 in parallel so 104 18650 cells, each cell is about 48g so 4. Feedback: Your satisfaction and positive feedback is very important for us, if you have any problems, don't hesitate to contact us.

Spare parts are sent by Royal Mail and may take an extra 1-2 days, small models by Parcelforce and large bulky items by UPS. This Electric Bicycle Controller Kit with two Speed Mode controlling, the 250W road-legal Mode and the 1500W High-speed Mode.There's front wheel motors, rear wheel, bottom bracket motors, then 24V/36V/48V/52V batteries at this Ah, that Ah, the other Ah, then there's all different controller boxes, whether you want a push button throttle or a twisty one, whether you want an LCD screen and how good you want it.