Synology Mesh Router MR2200ac, MR2200AC

Product Information

First, connecting to my cable modem, is a Netgate SG-3100 (running pfSense). Which I’ve configured to have 3 seperate LAN segments.

Fixed an issue where SRM might not be able to access the Internet when IPv6 server is in the local network, or when the network has been connected via IPv6 for a period of time. The Synology WRX560's network port area is a bit recessed, making it hard to remove a cable -- there's not enough room to put an adult's index finger or thumb on top of the connector to press down its release tab. If you have more than one wireless satellite node, place them around the main router and not in a straight line to get the best performance. Fixed the issue where iPhone 11 running iOS 13.2.3 might fail to connect to the WPA3-Enterprise wireless network.Unified the behaviors of soft reset on RT1900ac, RT2600ac, and MR2200ac: the username of administrator's account can be customized during the reset. Fixed an issue where the Wi-Fi system might not properly respond to requests from Windows Network Discovery. After that, follow the wizard to add the satellite(s). Again, with SRM 1.3, you can have multiple satellites (both wireless and wired) simultaneously. SRM 1.2 only allows for adding one wireless satellite at a time. After the setup process, you'll get to the router's interface. There are two apps for you to get your network up and running.

The update will be available for all regions within the next few days, although the release time in each region may vary slightly. Fixed the issue where clients on 802.11ac Wi-Fi network might not be able to connect to Synology Router. Fixed the issue where Wi-Fi speeds might drop when a mesh system contains Wi-Fi points with older SRM versions. Similar to Asus’s AiMesh, a Synology Mesh can do much more than provide a reliable seamless Wi-Fi network. It’s a system that gives you the most, if not everything, regarding home networking needs. A combo of the RT2600ac (top) and the MR2200ac has been a main Synology mesh setup before the release of the RT6600ax. What you can expect from a Synology mesh system Fixed an issue where the primary Wi-Fi point might not display the device list properly when under Wireless AP mode.

Also, while an MR2200ac can work either as the primary router or a satellite mesh point (extender), the RT2600ac can only work as the primary router and not as a satellite. Synology MR2200ac: Detail photos The Synology MR2200ac's front. The first is Network Center that helps manage all network aspects (local settings, Internet, port forwarding, and so on). And the second, the Wi-Fi Connect app, will take care of all things Wi-Fi, including adding a second MR2200ac unit as a mesh point.

SRM has a robust web interface similar to a native operating system: A desktop, a taskbar, and a start menu. Each setting section or feature has an app with an icon. You can open multiple apps at a time. Since SRM is persistent across devices, all Synology routers running the same version of SRM will have the same set of settings and features. The WRX560 has just one 2.5GbE LAN/WAN port. And that's a big missed opportunity. Things would be much different if it had a second Multi-Gig LAN port. I haven’t started using any of these right now. I’m still using a Nighthawk R8000 but it’s getting flaky :). Anyway, how should I do the initial setup for the new mesh system? Should I start up the RT and get everything working with it and then plug in each MR unit and let the RT “find” them? Or, is it better to have all three units plugged in, ready to go, and begin the initial setup process? The main differentiator for Synology's NAS enclosures is DiskStation Manager, the web-based operating system that comes with a smorgasbord of features designed to expand what the NAS is capable of. So when Synology started off with home networking, it introduced a similar feature-driven OS called Synology Router Manager (SRM).

If your MR2200ac is on SRM 1.2, follow the guide above to upgrade it to SRM 1.3. If you have updated your MR2200ac to SRM 1.3, you now need to restore it to factory settings here: Fixed an issue where SRM updates might be unavailable on the GUI due to incorrect detection of storage capacity.