AquaHouse DI Car Wash water filter, Pure water for Spot Free Rinse Car Valeting & Window Cleaning

Product Information

Furthermore, not having to wait at the car wash would be at least 24 hours of savings in time that you’d get back if you just did this at home with the right equipment. Left the car to dry naturally and the results to both bodywork and glass were outstanding with no additional wipe down required. However, soft water doesn’t necessarily mean water that’s free of all TDS – particles that can cause stains. The physical process occurs through an ion exchange resin that filters through the salts to obtain a smooth water quality that will leave the surface of a car spotless. This is a breakthrough in filtered water product for car washing that is proving to be very popular.

There should be some type of table that explains if your hardness is X then you should regenerate after every X amount of gallons. Convinced by reading all the reviews I purchased one and it is truly amazing not one water mark left on a black car. I’d never used a water filter on my car before but it’s one of those things from which I’ll never go back.

Even though I had read all the great reviews I was still sceptical especially as we are in a very hard water area in rural Essex. However, doing so only creates soap scum as well as using too much of it, which is a waste of money. Check out our recent posts and even browse by different categories to get the exact information you need! The soft water flowing through the Travel Series and into the pressure washer performed better than expected.

So, washing your car with softened water will remove scaling in your home, but if you have a high TDS level, you may still get water spots on your car after washing.Forget drying: smooth quality allows droplets to evaporate quickly; Making the drying process unnecessary. We can provide the highest quality water softeners and reverse osmosis systems to help your business reduce costs and increase service quality.

Save the product: the chemicals in soaps and detergents will be able to react to their full potential with a milder quality.

Soft water doesn’t mean TDS-free water, and similar to mineral molecules, high levels of TDS may also leave spots on the car after a wash. We filled 3 separate vessels with the same mixed bed resin (Purolite MB400 or MB 115) and tested the overall capacity at the same standard flow rate (6 litres per minute) using Harpenden towns mains water at a TDS of 420. If you do that, carbon dioxide will be released as a reaction, and if you’re in a closed space, that might be fatal.

W Razor we had it plumbed all for soft water, I have "hard" well water instead of city water so given what it did to our old touchfree pump and piping overtime I choose to have it plumbed all soft but I also left the option if needed to plumb back to hard in an emergency. To provide spotless car wash services, the water must be filtered of these minerals and dissolved solids. Usually I’d have to rush around with the drying towels and no matter how quick and well I do the job, there is always spots and streaks due to the hardness of our water here in rural Berkshire. Take care and observe the results from using RO reject water so adjustments can be made as necessary.

However, never mix the washing soda with vinegar, which is another item commonly used for softening water. The media will produce up to 700L of water before it needs replacing (depending on local water hardness) and a final rinse usually uses around 10 litres of water. Some people attempt to mitigate this by simply adding more detergent to the water, but this is ineffective.