Minelab Equinox 600 Metal Detector Depth Sensor Multi-Frequency VLF

Product Information

The metal detector is budget-friendly compared to its Equinox 800 counterpart; hence, you could get yourself a 600 and upgrade with a smaller search-coil and (or) headphones and still save some change. After the original release of the Equinox 600 and 800 in 2018, Minelab updated the line with the 700 and 900 in 2022.While Minelab has added many enhancements to the Equinox 700 and 900, it is still built on the same core technology first introduced in 2018 with the 600 and 800. Minelab's major enhancement to its lineup came with the Manticore in 2022. Using the table above, you can clearly see that the using the Iron Bias settings between 2 and 4 on the Equinox 800 is equivalent to using Iron Bias settings 1 and 2 on the Equinox 600. Default Iron Bias Settings For The Minelab Equinox 800 and 600. The Iron Bias setting is considered a local change only. Iron Bias does not impact other Equinox search profiles. The Iron Bias settings only impacts the current search profile the operator is using. In other words, if you are using the Park 2 search profile, the Iron Bias settings in Park 1 or any of the other profiles will not be changed.

The EQUINOX 600 offers 3single frequencies of 5, 10, 15, kHz, giving an expanded 3-times range of 5 to 15kHz. Another special feature of the Minelab Equinox 800 is its ability to bypass false signals. While looking for lost metal pieces, you will rarely experience interferences from power lines or electronic devices in your vicinity. Things you need to consider Although the wired headphones are convenient, the Equinox 600 is just compatible with wireless headphones but does not include them. The main reason for writing these blogs is to bust a few myths that have sprung up since the release of the Equinox.It is important to point out that there is a very fine line or what we call the “sweet spot” when it comes to using Iron Bias. Too much Iron Bias will eliminate those good targets like coins and jewelry. Not enough Iron Bias could result in the operator digging undesirable targets like small nails. Use this setting with caution. Does Iron Bias Impact Every Equinox Search Profile When Changed? EQX 06 – a 6″ round Double-D search-coil for hunting in areas filled with trash and sensitive to small targets. It also works well in difficult terrain.

Experienced detectorists will appreciate the long battery life of Minelab Equinox 800, which can stretch to up to 12 hours on a single charge. This device can function on high, simultaneous frequency 24 / 40 kHz that you can change at a push of the button without experiencing any interruptions in your search. Special FeaturesHaving three selectable frequencies gives the versatility that is equivalent to three conventional single frequency detectors. Press and hold the gear symbol until you see the letters “FE” appear on the screen. You are now in the Iron Bias setting. (Image Above: Middle) From my experience using the Equinox 800 I very seldom set my Iron Bias setting above 4 and usually stay within the 2-4 range. I have tested and found that Iron Bias settings over 4 will start to reduce the sound quality of the target, making it more faint and harder to detect. Is The Iron Bias Setting Different Between The Equinox 600 and 800?

It’s once again a battle between an older, established Equinox model which represents outstanding value, and a higher-priced, next-generation model with upgraded features. The compromises are one less detecting mode, the 600 doesn’t have the Gold Mode, your choices in some of the settings are not as wide as the 800 and the WM08 wireless unit isn’t supplied. Also, the individual frequencies you can choose are limited, with only 5, 10 & 15 kHz being available. The EQUINOX Series features Minelab’s STATE-OF-THE ART Multi-IQ simultaneous multi-frequency technology and combines fast recovery speed with low-latency wireless audio in a lightweight waterproof platform. We asked Minelab about if they differ and they said that the new Equinox models have a ‘tuned’ version of Multi-IQ. They did not specify how, and to be honest, I’m not sure we’d understand if they did, but it suggests marginal improvements that are down to processor efficiency. The search modes also remain the same. Field, Beach and Park are all accessible, with the Gold search mode being reserved for the Equinox 800 and Equinox 900 models.

Accessories

The control box is very similar on both machines, identical in terms of quality and with very minor changes. Icons and buttons lie in the same places which mean that if you are considering an upgrade from the Equinox 600 to the Equinox 700 then you will have virtually no learning curve. It’s also worth pointing out that if you’re new to the Equinox range you won’t struggle too, as the screen is simple. The arc number in the centre is the target identification number, depth indicator lies to its right hand side, the circular graphic shows the discrimination pattern, battery life is in the top left corner and search modes are at the bottom. It’s nice and simple. The Minelab Equinox 600 comes with pre-configured settings and several pre set modes, which in themselves are excellent. You could find virtually all types of metals with multiple frequencies at work. Noise won’t be a bother because of its automatic Noise Cancel. You could also take advantage of its auto ground balancing (or tweak it to your taste with the manual option) and its adjustable threshold. Detect Modes on Equinox 600 The Equinox 700 wins on discrimination, waterproof rating, headphones, composition and auxiliary features (torch, vibration etc).