Mitre Shears/Mitre Angle Trim/PVC Decking Cutter

Product Information

Capable of cutting a wide range of materials such as laminate, wood and metal, mitre saws are versatile, multi-purpose tools. The best Evolution saw blades for cutting Laminate flooring are either the Fine Wood blades or the Thin Steel blades. The trouble is that the bottom of the board is cut to a razor sharp edge and as the cut progresses the board tends to sink under its own weight.

From top to bottom: spot on with full bevel on front edge; fence too far forward, blunt edge to bottom of cut; fence too far back, full bevel but front edge of board cut back. Whether you’re working with metal, silver, gold, or other materials, our mitre cutter jig will help you achieve clean, accurate cuts every time. I don’t think I would trust it to be 100% accurate on the angle of cut and would recommend double checking with a square or protractor, but once set will give nice uniform clean cuts.The R255SMS+ has a cross-cut capacity of 300x80mm and the R255SMS-DB+ Double Bevel has a cross-cut capacity of 300x90mm. Proper Use: Use it only for its intended purpose, which is to be able to cut small profiles and strips made of soft materials. Introduction: Welcome to our blog, where we unravel the mysteries surrounding 3-star Euro cylinders.

For laying engineered wood and luxury vinyl flooring we’d choose the R210SMS-300+ and a 210mm Fine Wood blade; that’s the perfect Mitre Saw for cutting any flooring up to 300mm in width. If you need to make repeated cuts in masonry, we recommend that you take a look at our range of Electric Disc Cutters/Concrete Saws. A Double Bevel Saw can rotate both left and right, about the vertical plane, to make bevel cuts on both sides without having to flip the workpiece. While standard mitre saws tilt to cut at different angles, compound saws can also pivot left and right.The most common type of mitre box is 3-sided which is open at the top and at both ends to allow the material to be placed inside and lined up with the guides before making the cut. This heavy duty trimmer is a substantial piece of machined cast iron, with razor sharp, tool steel blades.

PVA Glue Reinforcement: Do not forget to reinforce the structural pieces with PVA glue during assembly to increase its resistance. Ne pas négliger la fine couche de colle blanche entre les pièces non mobiles, qui contribue grandement à rigidifier l'ensemble. Our S355CPS is the industry standard metal cutting Chop Saw and used by welders, machinists and fabricators all over the world. The Evolution R255SMS-DB+ Double Bevel Mitre Saw would be the best saw for cutting decorative moulding. Other features include a robust outer casing which enhances durability on even the most demanding metallic applications.Blade life depends on the material being cut, the harder the material the shorter the blade life will be. They can be used on any flat surface, bench mounted, used on a Sawhorse Table or fitted to our Universal Mitre Saw Stand. The maximum cut depth on a Mitre Saw depends on the blade size and the clearance around the blade guard. With the flat cuts you can use a push block with built-in breakout protection (as described in Quick Tips).

These are adjustable and can be moved inwards and outwards to accommodate various blade cutting angles. If there is one element of the framing process that is essential, it is accurately finished mitre cuts. A Mitre Saw is the perfect choice for fitting laminate flooring, they let you make accurate, perpendicular and bevelled cuts through your flooring as well as making perfect Mitre cuts for those decorative sections. These are large 1/2in shank cutters and require a powerful variable-speed router mounted in a table. A mitre block is used to provide a solid guide when hand cutting mitre joints at a variety of angles, though 45 or 90 degrees are the most typical cuts required.The greater cross-cut capacity of the ‘300’ version makes it a better choice for larger cuts; it’s perfect for chopping down 12x2 floor joists and skirting boards up to 12”. The cuts will be improved if the cutter aperture in the fence is as close as possible to the shape of the cutter, preferably ‘zero-clearance’. These gasket shears are great for cutting rubber but also for cutting wood or plastic trims for windows and doors, these hard-working shears are made to last and will stay sharp and true even with daily use.