Heat Transfer Vinyl - 12In x 8Ft White HTV Vinyl Roll,White Iron on Vinyl Roll for Cricut & Cameo - Easy to Cut & Weed for Heat Vinyl Design(White)

Product Information

If your cut design is considerably smaller than the piece of vinyl you cut it from, then before weeding, I recommend trimming off that extra vinyl. You can just use a pair of scissors to cut around your design. This allows you to use the rest of your vinyl piece for another project. (In my weeding images below, I actually cut a rectangle around my design with my Silhouette first and and then trimmed off the extra vinyl with scissors after weeding. Either way works!) Tips for Weeding Heat Transfer Vinyl A: Each sublimation project will be different, but for THIS project you’ll press your clear HTV at 385° F (196° C) for 30 seconds to apply it to your shirt, and then sublimate at the same temperature for 55 seconds. For the white iron-on vinyl layer, prepare a green StandardGrip machine mat with the white HTV, shiny side down, and secure it with a brayer. Next, trim and weed the HTV design to remove any excess material. This will ensure that the design is a perfect fit for the HTV. Then, place the HTV onto the heat press and apply heat-resistant tape to the edges to ensure that it stays in place.

No, you don’t. As I was making these shirts I was thinking how fun it would be to create a Halloween design and then instead of using a white HTV for the eyes use a glow-in-the-dark HTV. I would love to see kids’ reactions to a shirt like that. There are a few basic steps to working with heat transfer vinyl, and I will walk you through each one. The basic steps to working with iron on vinyl are: HEAT APPLY: Turn the design over and apply the design (ideally with a heat press) according to the instructions provided. Are you tired of settling for generic, plain, and boring apparel? Look no further! Our top-notch Heat Transfer Vinyl (HTV - Iron On Vinyl) is here to revolutionize your creativity and upgrade your wardrobe like never before.Additional Questions Which We’re Commonly Asked How Much Pressure And Cutting Speed Should I Use On HTV? To really get good pressure, I prefer to use an ironing pad like this one on a sturdy table instead of a folding ironing board. You can also try putting a wooden cutting board on your table. How to Iron It is important to follow the manufacturer’s instructions for cooling and peeling the HTV. Once it has cooled, gently peel off the to reveal the design on the white HTV. If there are any areas of the design that did not transfer correctly, you can use a heat press to apply more pressure and heat to those areas. Now we are all ready to transfer our cut and weeded design to our t-shirt! To activate the adhesive on the heat transfer vinyl, you need two things: heat and pressure, both of which we can get using an iron.

Once the HTV has been trimmed, it’s time to weed the design. This involves removing any unwanted parts of the design, such as small pieces of text or intricate details that may not transfer well. To weed the HTV, use a weeding tool or a pair of tweezers to carefully remove the excess material from the design, leaving only the parts that you want to transfer onto the fabric. Applying Heat Resistant Tape Once the iron on vinyl has been properly applied it is ready for wearing, using, and laundering. Allow the adhesive to cure for at least 24 hours before washing. Once it has cured, it can be washed and dried. For best results, wash inside out with cold water and hang to dry or tumble dry on low. Using theT-shirt guide, find where you'd like to place the white iron-on vinyl and place it face down.

Project Notes:

Premium Plus HTV Heat Transfer Vinyl(for cotton, polyester, poly-cotton, lycra, spandex and nylons) Sublimation on white HTV requires specific materials to ensure a successful and high-quality transfer. In this section, we will discuss the essential materials needed to achieve the best results. White HTV If you need a more stretchy HTV then Premium Plus Stretchable HTV Vinyl is a thin and durable, matt vinyl/flex which is perfect for sportswear, promotional wear and workwear alike. It’s also PVC and Phthalate-free which makes it more environmentally-friendly and more suitable for application onto kidswear.