Stick It! Cool Melt Glue Gun

Product Information

In terms of drying time, you might be asking yourself; How long does it take hot glue to dry? In answer, allow at least 5 minutes before moving anything to ensure the glue has time to set. Lay your surfaces to be glued down flat on your work surface and position the nozzle of the gun at the start of your first surface. During use: Use the gun in a well-ventilated area to avoid inhaling glue vapours. Make sure it has a stable stand to rest upright when not in use, and don't rest it on its side. When the gun is switched on, focus on the glueing task and do not look away unless it's rested securely. If you need to leave it unattended, switch it off at the wall.Never use a glue gun tilted upwards or overhead.

Before use: Remember, always read the manual before using a glue gun for the first time. Then, inspect the casing and plug wiring for damage before plugging it in. You should put on heat-resistant work gloves and safety goggles too, and place somecardboard or newspaper underneath the gun to protect your worktop. Yes, you can use a low temperature glue gun on balloons without popping them, making it a suitable tool for various balloon-related decorations. Low temp glue guns operate at a lower temperature compared to high temp glue guns, which makes them safe and easy to use on heat-sensitive materials like balloons. Why buy from gluegunsdirect.com? Are there any other options than a low temperature glue gun when it comes to heat sensitive materials?Apply adhesive to one surface. Press surfaces together within 15 seconds. Use of clamp or other holding device is not necessary At Bostik, we have two types of hot glue gun, Bostik Handy Hot Melt Glue Gun and Bostik DIY Hot Melt Glue Gun. Both provide strong adhesion to most materials like paper, wood, metal, glass, card, as well as many craft materials, so you can repair or create almost anything. Also, ensure that your work surface is flat and level. The support stands that come with most off the shelf glue guns aren’t that great and can easily topple over if not resting on a level surface, and you certainly don’t want that happening when it’s turned on and up to temperature.

Low melt glue guns are safe and easy to use. Low melt glue guns reduced risk of burns due to the adhesive being applied at a lower temperature and are commonly used for bonding heat-sensitive materials like polystyrene which a hot melt adhesive would melt! Also used extensively in arts and crafts and schools. Any tool handled carelessly or incorrectly can cause painful and sometimes permanent injury, and a glue gun is no exception. With that in mind, please take a minute to read this safety advice for the next time you or a loved one uses your new glue gun.

Most glue guns heat up at the tip so you’ll know it’s up to temperature and ready when you squeeze the trigger and the glue starts to flow. How to Use a Glue Gun – A Step by Step Guide Plug in the gun and a light will come on at the rear to indicate that it is in operation. Then, rest the gun on its stand and allow to warm up for approximately 5 minutes Ensure surfaces to be bonded are clean and dry APPLICATION Wipe off any dust or debris produced by the sanding and you should now be ready to go. Step 4 – Start Gluing Essentially, standard glue guns come in two different formats; high temperature hot melt and low temperature cool melt.