kenable 3 Pin Male XLR Plug to 3 Socket Female Mini XLR Cable 2m [2 metres]

Product Information

Thanks for the follow up. I've used it once, and it worked great. Definitely comes to every gig w me in my mic case, for the next time I have a drummer that insists on having each of his 6 toms mic'd. Good work!" - Ryan Leonardo/Davinci Sound & Vision (Fairfax, VA) The Laws of the jurisdiction where you are a resident, excluding its conflicts of law rules shall govern any Response: 10Hz-18kHz. Sensitivity: 2mV/Pa. Phantom power: 9-52V DC for C411 PP only. Dimensions: 3 x 20(depth x diameter) mm plate;.9.7 x 14.2 x 26.7(l x w x h) mm Weight: 18g without cable. The XLR connector is a type of electrical connector primarily used in professional audio, video, and stage lighting equipment. XLR connectors are cylindrical in design, with three to seven connector pins, and are often employed for analog balanced audio interconnections, AES3 digital audio, portable intercom, DMX512 lighting control, and for low-voltage power supply. XLR connectors are included to the international standard for dimensions, IEC 61076-2-103. [1] The XLR connector is superficially similar to the smaller DIN connector, with which it is physically incompatible. This is a lovely mic for capturing vocals and acoustic guitar. It's not too dissimilar to its baby sister the Origin, displaying a smooth mid-range, and an agreeably bright high top. You don't have to go searching for either warmth or clarity with Aston. The proximity effect is well controlled, and we're happy to report that this didn't translate into thinness when omni was selected. The third pattern is the less used, but no less useful, figure-8.

Quite nicely actually-running all of our drummers toms thru it---I have a presonus 16.4.2 and always seem to need 17 channels-the mixer fills the void. Thanks" - Greg Percy (Monona, WI) Used by several models of Le Maitre and Ultratec fog machines for remote control. [ citation needed] Rechargeable devices exist that use three-pin XLR connectors. These can be found on electric powered mobility wheelchairs and scooters. The connectors carry from 2 to 10amps at 24volts. [ citation needed] I use the mini mixer on a regular basis. I use Shure Wireless mics. I run the wireless receivers into the mixer, and then send a single feed into my PA for my vocals. This works quite well. I am quite pleased with your product. " - Craig Seavey (Miami, FL) whether express, implied, statutory or otherwise, with respect to the Software, including all implied warrantiesIt's the perfect allrounder for those of us who are happy investing a bit of money in one mic that can cover most bases very well indeed. You'll find them useful in the studio too for exuberant vocalists who like to scream and bawl into the mic. Dynamic mics are passive, which means they don't need phantom power. Slate Digital's solution is to control the whole signal chain from start to finish so that its integrity is guaranteed. Its VMS suite includes both a colourless mic and a pristine pre-amp – if any audio kit has ever had a personality bypass this is it. What it does do though is offer up a completely blank canvas for Slate Digital's plugin to paint its magic.

or unauthorized access. Except as expressly granted in this Agreement, Music Tribe reserves and shall retain all

Lonnie - the little mixer works fine. I used it last weekend with our PA to add mics for a trio. The amp is battery powered and is my go to sys for weddings on the beach, in the garden, forest etc. but only has 3 xlr ins. So the Lifesaver 3>1 is the perfect addition. I also enjoyed your articles on corp a/v. They totally ring true in my experience." - Eric Torgerson (Kapaa, HI)

This is a tiny mic for a large diaphragm condenser, considerably smaller than Neumann's more expensive models, but its weeny form factor makes it easy to place when miking strings, cabs and percussion. There's no pad but it does have a relatively high SPL tolerance of 144dB, which makes it entirely suitable for drums and electric guitar. It also boasts very low self-noise that won't spoil quiet acoustic and tender vocal recordings. any kind. To the maximum extent permitted under applicable law, Music Tribe, on its own behalf and on behalfMany other types of connectors using the XLR type shell exist, with various pin configurations. One is the now obsolete three-pin power pattern connector manufactured by ITT Cannon. Agreement), even if Music Tribe or any supplier has been advised of the possibility of such damages and even if pin XLR Cable". Sterling Audio. Archived from the original on 10 September 2012 . Retrieved 6 September 2012. Start threading the Mogami through the paracord. It will only go in like this for a little bit, after a while it will not just push in anymore, and you’ll need to do what I like to call the “snake-and-pinch” method.

Start by cutting lengths of paracord and the Mogami. Cut a little more of the paracord than the Mogami, too long is better than too short. Pull the strings out of the paracord and toss them. Hey Lonnie, So today I am providing DJ and AV services for Kaiser Permanente in Pleasanton CA, it's a retirement dinner for a physician. I have channel one for the projector, channel 2 and 3 for the "turntables" and the remaining input for the mic. They just asked for another mic and look what came in SUPER handy today!" - Hugo Gomez/The Gomez Brothers Entertainment (Daly City, CA) Test your connection before assembling. I really should have done this before I assembled the mini XLR side but I got antsy and my connections were clean. benefit you utilize the software or who owns or otherwise controls the means through which you utilize orTwo features make the Røde NT1-A a standout microphone. With a self-noise level of just 5dBA it is one of the quietest mics out there. This has profound implications for capturing quiet sound sources or dynamic playing – anything where volume levels drop away to almost nothing, only to reveal that annoying, yet familiar mic hiss. Not with the NT1-A. Your performances will remain as clean as a whistle on washday.