About this deal
Sealed spherical roller bearings WS222..-E1, lip seals on both sides, for continuous casting machines Cylindrical roller bearings NU22..-E, main dimensions to DIN 5412-1, non-locating bearing, separable, with cage Cylindrical roller bearings NU3..-E, main dimensions to DIN 5412-1, non-locating bearing, separable, with cage For all FAG rolling bearings in the range fromd=20mmtod=480mm(excluding double direction axial bearings), the bore code is formed by dividing the dimension of the bearing bore by5.
The vast majority of our products are despatch the Same Day internationally, through DHL and with a delivery time of between 3 and 5 working days. DHL - 3-5 Day DeliveryCylindrical roller bearings NJ2..-E, main dimensions to DIN 5412-1, semi-locating bearing, separable, with cage The prefix normally identifies individual FAG bearing parts of complete bearings (in certain cases, this may also be part of the basic designation)
Tapered roller bearings 302, main dimensions to DIN ISO 355 / DIN 720, separable, adjusted or in pairs Tapered roller bearings 313, main dimensions to DIN ISO 355 / DIN 720, separable, adjusted or in pairs Cylindrical roller bearings with snap ring grooves are full-complement, double-row units comprising solid outer and inner rings with ribs, rib-guided cylindrical rollers and sealing rings. The outer rings have snap ring grooves for retaining rings. The inner rings are axially split, 1 mm wider than the outer rings and held together by a rolled-in steel strip. Locating bearings For certain FAG bearing types, the bearing bores are stated directly or in an encoded form in accordance withDIN623-1. Up tod<10mm, the bearing bore diameter is specified in the dimension-specific part of the designation (basic designation) directly as a number indicating the diameter. The manufacturing plant in Vadodara, Gujarat was set up in 1964 and produces a vast range of ball bearings, cylindrical roller bearings, and spherical roller bearing and wheel bearings and sold under the brand name of FAG. The second plant in Vadodara at Savli produces next generation deep groove ball bearings and large size roller bearings also sold under the name of FAG.Cylindrical roller bearings with snap ring grooves are locating bearings. These bearings are very rigid and can support axial forces in both directions as well as high radial forces. Tapered roller bearings 303, main dimensions to DIN ISO 355 / DIN 720, separable, adjusted or in pairs
Due to the grooves in the outer rings, the bearing rings can easily be axially located. The bearings are therefore highly suitable for cable sheave bearing arrangements. Axial spherical roller bearings 293..-E1, main dimensions to DIN 728 / ISO 104, single direction, separable Cylindrical roller bearings NUP2..-E, main dimensions to DIN 5412-1, locating bearing, separable, with cage Full-complement cylindrical roller bearings are available as non-locating, semi-locating and locating bearings as well as in single and double-row designs. X-lifeThe cylindrical roller bearings have high rigidity, high radial load-carrying capacity and, due to the cage, are suitable for higher speeds than full-complement designs. Bearings with suffix E have a larger roller set and are thus designed for extremely high load-carrying capacity. with an intermediate ring between the outer rings and the inner rings, axial internal clearance between .. and .. inμm Axial spherical roller bearings 294..-E1, main dimensions to DIN 728 / ISO 104, single direction, separable
Width and diameter series are described using numbers. In the case of radial bearings in accordance withDIN616andISO15, these are as follows: Cylindrical roller bearings NU2..-E, main dimensions to DIN 5412-1, non-locating bearing, separable, with cage
Designations of FAG metric tapered roller bearings
Dimension series for FAG radial bearings (excluding tapered roller and needle roller bearings) Width series– increase in cross-sectional width Axial spherical roller bearings 292..-E1, main dimensions to DIN 728 / ISO 104, single direction, separable Cylindrical roller bearings NJ4..-E, main dimensions to DIN 5412-1, semi-locating bearing, separable, with cage Fromd>480mm, the unencoded bore diameter is given with an oblique after the bearing series, e.g. FAG 232/500-BEA-XL-MB1 bearingwith bore diameter d=500mm.