Artillery Sidewinder x1 3D Printer, Multi-function 3D Printer the latest 4th Version Artillery 3D Printer with Aluminum Extrusion Frame & AC Build Plate 3D Printer (300 x 300 x 400 mm)

Product Information

Users simply remove a few screws to uncover the entire bottom portion of the base, revealing all the Sidewinder X1’s electronics. The volcano hot end is capable of higher flow rates (because it can melt the plastic filament faster) meaning it can print fast if needed. After checking for issues, i noticed that the layer shift is caused by the X motor pulley which was not tightened good enough from the factory. I initially had a problem getting the part to adhere to the base (not uncommon) but as soon as I started using decorators tape (I am using FrogTape) that disappeared- now sticks firmly. PrinterMods is a proud cog in that machine - supplying the maker community with what they need to grow and thrive.

However, Artillery has hot glued the connectors to the control board, requiring users to melt the glue before removing cables.includes a Creality CR-10 profile, which is very similar to this Artillery X1, I will use it as a basic profile. This can have the effect of Z-Axis offset from one side of the X-Axis rail to the other side due to misaligned or dragging axis wheels on the non-driven side of the X-Axis rail support. When the heated bed cools down, the adhesion decreases and you can easily remove your finished artwork.

Like other Artillery systems we’ve reviewed, the Sidewinder X2 lived in a small office next to our workstation printing away for months and was not a disruptive noise.The rods are supported by clamping shaft couplers and a high-precision belt pulley for improved stability and accuracy.