SubZero SZC-400 Condenser Microphone Studio Pack

Product Information

However, the Gear4music extended warranty scheme provides an enhanced service, and is designed to offer a higher level of protection than many 'free' warranties offered by some retailers and manufacturers. For customers in outlying areas of the country, the price of the Extended Warranty may be marginally higher, due to the potential for higher collection and redelivery transport costs. Studio - A must-have for engineers, musicians and producers, Bitwig Studio gives you full access to all features and tools, allowing your creativity to run wild. What's included?

Taking a peek inside reveals a Chinese-style chassis supporting three printed circuit boards populated with discrete components. The very high-impedance connections from the capsule are made with what appears to be PTFE coated wire, and these terminate on bushed pins, also coated with PTFE to avoid current leakage through the circuit board material itself. The necessary components are then wired directly to these pins, which is a good approach. This mic uses FET circuitry, specially chosen for its low distortion and superior signal to noise ratio; giving a clear and accurate sound. The robust chassis and included mic cradle mean there is very little handling noise, retaining a clean, isolated sound.SubZero quote a frequency response of 20Hz to 20kHz (±3dB); the included graph shows a gently rising response above 2kHz, peaking at around 12Hz. The exact shape of the curve in the higher registers varies a little depending on the pattern selected, but this general rising characteristic remains consistent. A maximum SPL of 136dB (or 146dB with the pad engaged) is specified along with an equivalent noise level of 17dB, which again is likely to change slightly with the different patterns. Sensitivity is -38dB. In normal use no circuit noise was evident. Listening In

Collection and delivery costs are included for the first 2 years in the event of an item becoming faulty The recessed cable run also eliminates an outpouring of cables. By using the supplied cable clips you're able to connect it firmly in place for smooth integration with the run. This is excellent for prolonging the life of your equipment by ensuring no accidental damage occurs when catching cables. It also guarantees a clean and tidy workspace at all times, allowing you to remain both productive and objective. What's included? The SZ-V12C, by contrast, injects a hint of low-end tube warmth bolstered by the output transformer but partnered with a much more conventional-sounding high end. On my own voice I detected a little harshness at around 2.7kHz, but that was easily tamed using a small amount of EQ cut at the same frequency. Its highs certainly aren’t as refined-sounding as those of more sophisticated microphones, and there isn’t quite that same sense of airiness and space, but given its price the SZ-V12C puts in an impressive performance and it responds well to EQ if you need to sweeten the sound. The SZC-300 is housed in a sturdy and durable metal chassis. Also presented with a carry pouch and a screw on mic clip, the SZC-300 is the perfect introduction to recording, and is the obvious choice for anyone who needs a high-quality mic on a budget. Specifications SubZero SZC-300 Large Diaphragm Condenser MicrophoneIncluded in the box are two clamps. These provide you with the best of both worlds. One allows you to position the microphone either vertically or horizontally. The large threaded mount allows you to mount the arm directly through a hole in the desk. Unlike most boom arms, the SubZero studio arm does not require external springs. This ensures a more aesthetically pleasing design and enhances the strength of the arm. Clean set-ups ensures a focused mind